Dell M3800 owner manual Installing the Touchpad, Removing the Hard Drive

Installing the Touchpad

1.Align the touchpad in its position on the computer.

2.Tighten the screws to secure the touchpad to the computer.

3.Connect the touchpad cable to the system board.

4.Install the:

a.battery

b.base cover

5.Follow the procedures in After Working Inside Your Computer.

Removing the Hard Drive

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the:

a.base cover

b.battery

3.Perform the following steps to remove the hard drive from the computer:

a.Disconnect the hard-drive cable from the system board [1].

b.Remove the screws that secure the hard drive to the computer.

c.Lift the hard drive off the computer [2].

15