Dell M3800 owner manual Installing the System Board

Installing the System Board

1.Align the system board on the computer.

2.Tighten the screws and the captive screws to secure the system board to the computer.

3.Slide the keyboard cable in the connector and press down on the connector latch to secure the cable.

4.Adhere the tape to the keyboard-cable connector.

5.Route the following cables on the system board and press down on the connector latches to secure the cables:

a.speaker

b.keyboard (affix the tape)

c.touchpad

d.keyboard backlight

6.Connect the following cables to the system board:

a.display

b.hard drive

c.touch panel

d.power connector

CAUTION: Make sure that no cables are placed under the system board.

7.Install the:

a.memory module(s)

b.mSATA card

c.heatsink

d.fans

e.battery

f.base cover

8.Follow the procedures in After Working Inside Your Computer.

27