Dell M3800 owner manual Installing the mSATA Card, Removing the Fans

Installing the mSATA Card

1.Align the notch on the mSATA card with the tab on the mSATA-card connector.

2.Insert the mSATA card into the mSATA-card connector.

3.Tighten the screw to secure the mSATA card to the computer.

4.Connect the I/O-board cable to the system board and I/O board.

5.Install the:

a.battery

b.base cover

6.Follow the procedures in After Working Inside Your Computer.

Removing the Fans

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the:

a.base cover

b.battery

3.Perform the following steps to remove the system fan:

a.Disconnect the system fan cable from the system board [1].

b.Disconnect the camera cable from the I/O board [2].

c.Remove the screw that secures the system fan to the computer.

d.Lift the system fan away from the computer [3].

4.Perform the following steps to remove the video-card fan:

a.Disconnect the video-card fan cable from the system board [4].

b.Remove the screw that secures the video-card fan to the computer.

c.Lift the video-card fan away from the computer [5].

21