Dell 518, MT480, 519 manual Indicates that the network cable has been

Connectors (continued)	Inspiron 518/519
Network	10/100/1000 Mbps Ethernet LAN on the
	system board.
	RJ-45 port — Connect one end of a network
	cable to either a network connector or your
	network or broadband device. Connect the
	other end of the network cable to the network
	adapter connector on your computer. A click
	indicates that the network cable has been
	securely attached.
	NOTICE: Do not plug a telephone cable
	into the network connector.
	On computers with an additional network
	connector card, use the connectors on the
	card and on the back of the computer when
	setting up multiple network connections
	(such as a separate intra- and extranet).
	It is recommended that you use Category 5
	wiring and connectors for your network. If
	you must use Category 3 wiring, force the
	network speed to 10 Mbps to ensure reliable
	operation.
USB	Eight USB 2.0-compliant connectors
	Front-panel (2)
	Back-panel (4)
	Top USB tray (2)
	Use the back USB connectors for devices that
	typically remain connected, such as printers
	and keyboards.
	NOTE: It is recommended that you use the
	front USB connectors for devices that you
	connect occasionally, such as flash memory
	keys or cameras, or for bootable USB devices.

Specifications

21