1 | release tab | 2 | card retention mechanism | 3 | card retention door |
|
|
|
|
|
|
4. Push the two release tabs on the card retention door from the inside to pivot the door open; the hinged door will remain in the open position.
1 | release tabs (2) | 2 | filler bracket | 3 | alignment guide |
|
|
|
|
|
|
4 | alignment bar | 5 | card retention door |
|
|
5.If you are installing a new card, remove the filler bracket to create a
6.If you are replacing a card that is already installed in the computer, remove the card.
If necessary, disconnect any cables connected to the card. Grasp the card by its top corners, and ease it out of its connector.
7.Prepare the card for installation.
See the documentation that came with the card for information on configuring the card, making internal connections, or otherwise customizing it for your computer.
CAUTION: Some network adapters automatically start the computer when they are connected to a network. To guard against electrical shock, be sure to unplug your computer from its electrical outlet before installing any cards.
8. Place the card in the connector and press down firmly. Ensure that the card is seated fully in the slot.