Dell 410 specifications

Page 23

1

PCI Express x16 card slot

2

PCI Express x16 card

3

securing tab

 

 

 

 

 

 

4

PCI Express x1 card

5

PCI Express x1 card slot

 

 

 

 

 

 

 

 

7.Prepare the card for installation.

See the documentation that came with the card for information on configuring the card, making internal connections, or otherwise customizing it for your computer.

CAUTION: Some network adapters automatically start the computer when they are connected to a network. To guard against electrical shock, be sure to unplug your computer from its electrical outlet before installing any cards.

8. If you are installing the card into the x16 card connector, position the card so that the securing slot is aligned with the securing tab.

NOTICE: Ensure that you release the securing tab to seat the card. If the card is not installed correctly, you may damage the system board.

9. Place the card in the connector and press down firmly. Ensure that the card is fully seated in the slot.

1

fully seated card

2

not fully seated card

3

bracket within slot

4

bracket caught outside of slot

5

alignment bar

6

alignment guide

 

 

 

 

 

 

10. Ensure that:

The tops of all cards and filler brackets are flush with the alignment bar.

The notch in the top of the card or filler bracket fits around the alignment guide.

11.If you removed a card retention mechanism, snap it into place, securing the PCI-E card.

NOTICE: Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment.

NOTICE: To connect a network cable, first plug the cable into the network device and then plug the cable into the computer.

12.Replace the computer cover, reconnect the computer and devices to electrical outlets, and then turn them on.

13.If you installed a sound card:

a.Enter system setup, select Integrated Audio Controller, and then change the setting to Off.

b.Connect external audio devices to the sound card's connectors. Do not connect external audio devices to the integrated microphone, speaker/headphone, or line-in connectors on the back panel.

14.If you installed an add-in network adapter and want to disable the integrated network adapter:

a.Enter system setup, select Integrated NIC Controller, and then change the setting to Off.

Image 23
Contents Model Dcta August 2006 Rev. A00 Front View of the Computer About Your ComputerBack View of the Computer Back Panel ConnectorsBack to Contents Problem Description Suggested Resolution Advanced TroubleshootingPower Lights Diagnostic LightsCode Cause Beep CodesMessage Possible Cause Corrective Action System setup see Entering System SetupTab Function Dell DiagnosticsDell Diagnostics Main Menu Option FunctionIdentifying Drivers Reinstalling DriversDrivers Click Start, then click Help and Support Resolving Software and Hardware IncompatibilitiesTurning Off Your Computer Before You BeginGetting Started Recommended ToolsBack to Contents Removing the Computer Cover Removing and Installing PartsSystem Board Components Inside View of Your ComputerMemory Overview MemoryAddressing Memory With 4-GB Configurations Installing MemoryPage PCI Cards CardsRemoving Memory Page Page Removing a PCI Card PCI Express CardsPage Page Removing a PCI Express Card Removing the Drive Panel Drive PanelsRemoving the Drive-Panel Insert Installing the Drive-Panel InsertDrives Installing the Drive PanelRemoving a Hard Drive General Installation GuidelinesHard Drive Installing a Hard Drive Adding a Second Hard Drive Removing a Floppy Drive Floppy DriveMedia Card Reader Installing a Floppy DriveRemoving a Media Card Reader Installing a Media Card Reader Removing a CD/DVD Drive Installing a CD/DVD DriveCD/DVD Drive Battery Replacing the Battery Power SupplyInstalling the Power Supply Removing the Power SupplyRemoving the Processor ProcessorInstalling the Processor Page Removing the I/O Panel PanelPanel Components Page Installing the I/O Panel Removing the Processor Fan Processor FanCard Fan Installing the Processor FanRemoving the System Board Installing the Card FanSystem Board Removing the Card FanReplacing the Computer Cover Installing the System BoardBack to Contents Specifications Controls and Lights ConnectorsDrives Environmental PowerPhysical System Setup Options System Setup ProgramEntering System Setup System Setup ScreensDrives Option Settings Boot SequenceChanging Boot Sequence for Future Boots Clearing Forgotten PasswordsChanging Boot Sequence for the Current Boot Clearing Cmos Settings Flashing the Bios Technical Overview Power Supply DC Connector Pin Assignments Signal Name Color Wire Gauge DC Power Connector P1DC Power Connector P7 DC Power Connector P2DC Power Connect P4 DC Power Connect P3, P5, P8, P9, P13, and P14DC Power Connector P12 DC Power Connectors P10
Related manuals
Manual 63 pages 47.98 Kb Manual 63 pages 47.93 Kb

410 specifications

The Dell XPS 410, launched in the mid-2000s, was a prominent desktop computer known for its robust performance and modern design. Targeting both enthusiasts and everyday users, the XPS 410 emerged as a reliable option for gaming, media, and general computing tasks.

One of the standout features of the XPS 410 was its sleek and stylish appearance, designed to complement contemporary home and office environments. It boasted a stylish chassis with an integrated lighting system, showcasing Dell's commitment to aesthetics alongside functionality.

The XPS 410 was powered by Intel's Core 2 Duo processor, which offered significant improvements in performance and energy efficiency over its predecessors. Depending on the configuration, users could choose from various processors, allowing for customization based on personal needs. This flexibility made the XPS 410 suitable for resource-intensive applications, such as photo editing, video rendering, and gaming.

Accompanying the powerful processor was a choice of memory options, with support for up to 4GB of DDR2 RAM. This ample memory capacity ensured smooth multitasking and efficient handling of demanding software. Users could also enhance performance through options for high-speed graphics cards, with dedicated GPUs from NVIDIA and ATI, catering to the needs of gamers and graphic designers alike.

In terms of storage, the XPS 410 offered various hard drive configurations, with SATA drives ranging from 250GB to 750GB, ensuring ample space for files, applications, and multimedia. Additionally, with options for RAID configurations, users could benefit from increased data redundancy and improved performance.

The XPS 410 also incorporated advanced technologies such as Dell's Media Center remote control compatibility, allowing for convenient navigation and control of media applications. The inclusion of multiple USB ports and card reader slots made it easy for users to connect a variety of peripherals, enhancing the overall functionality of the system.

Another noteworthy aspect of the XPS 410 was its ability to run Windows Vista, further emphasizing its appeal during a time of transition in consumer operating systems. The combination of powerful hardware and versatile software offerings made the XPS 410 a favored choice among professionals and gamers alike.

In summary, the Dell XPS 410 was a well-rounded desktop computer, featuring powerful processors, ample memory and storage options, and an appealing design. It catered to a wide variety of users, providing performance and versatility that stood out in its era.