Dell 410 specifications Installing the Processor

Page 40

1

heat sink and fan shroud assembly

2

captive screw housing (2)

NOTICE: If you are installing a processor upgrade kit from Dell, discard the original heat sink. If you are not installing a processor upgrade kit from Dell, reuse the original heat sink when you install your new processor.

7. Place your finger upon the hook end of the release lever, then push down and out to release it from the tab that secures it

1

processor cover

2

processor

3

processor socket

 

 

 

 

 

 

4

release lever

 

 

 

 

8. Release the release lever and lift the processor cover.

NOTICE: When the release lever is freed, the processor may shift in place. Before securing the processor cover after it has been opened, ensure that the notches on the processor are aligned with the notches on the socket.

NOTICE: When replacing the processor, do not touch any of the pins inside the socket or allow any objects to fall on the pins in the socket.

9.Gently remove the processor from the socket.

Leave the release lever extended in the release position so that the socket is ready for the new processor.

Installing the Processor

NOTICE: Ground yourself by touching an unpainted metal surface on the back of the computer.

NOTICE: When replacing the processor, do not touch any of the pins inside the socket or allow any objects to fall on the pins in the socket.

1. Unpack the new processor, being careful not to touch the underside of the processor.

NOTICE: You must position the processor correctly in the socket to avoid permanent damage to the processor and the computer when you turn on the computer.

2.If the release lever on the socket is not fully extended, move it to that position.

3.Orient the front and rear alignment notches on the processor with the front and rear alignment notches on the socket.

4.Align the pin-1 corners of the processor and socket.

Image 40
Contents Model Dcta August 2006 Rev. A00 About Your Computer Front View of the ComputerBack Panel Connectors Back View of the ComputerBack to Contents Advanced Troubleshooting Power LightsDiagnostic Lights Problem Description Suggested ResolutionBeep Codes Code CauseSystem setup see Entering System Setup Message Possible Cause Corrective ActionDell Diagnostics Dell Diagnostics Main MenuOption Function Tab FunctionDrivers Reinstalling DriversIdentifying Drivers Resolving Software and Hardware Incompatibilities Click Start, then click Help and SupportBefore You Begin Getting StartedRecommended Tools Turning Off Your ComputerBack to Contents Removing and Installing Parts Removing the Computer CoverInside View of Your Computer System Board ComponentsMemory Memory OverviewInstalling Memory Addressing Memory With 4-GB ConfigurationsPage Removing Memory CardsPCI Cards Page Page PCI Express Cards Removing a PCI CardPage Page Removing a PCI Express Card Drive Panels Removing the Drive PanelInstalling the Drive-Panel Insert Removing the Drive-Panel InsertInstalling the Drive Panel DrivesHard Drive General Installation GuidelinesRemoving a Hard Drive Installing a Hard Drive Adding a Second Hard Drive Floppy Drive Removing a Floppy DriveInstalling a Floppy Drive Media Card ReaderRemoving a Media Card Reader Installing a Media Card Reader CD/DVD Drive Installing a CD/DVD DriveRemoving a CD/DVD Drive Battery Power Supply Replacing the BatteryRemoving the Power Supply Installing the Power SupplyProcessor Removing the ProcessorInstalling the Processor Page Panel Components PanelRemoving the I/O Panel Page Installing the I/O Panel Processor Fan Removing the Processor FanInstalling the Processor Fan Card FanInstalling the Card Fan System BoardRemoving the Card Fan Removing the System BoardInstalling the System Board Replacing the Computer CoverBack to Contents Specifications Drives ConnectorsControls and Lights Physical PowerEnvironmental System Setup Program Entering System SetupSystem Setup Screens System Setup OptionsDrives Boot Sequence Option SettingsChanging Boot Sequence for the Current Boot Clearing Forgotten PasswordsChanging Boot Sequence for Future Boots Clearing Cmos Settings Flashing the Bios Technical Overview Power Supply DC Connector Pin Assignments DC Power Connector P1 Signal Name Color Wire GaugeDC Power Connector P2 DC Power Connect P4DC Power Connect P3, P5, P8, P9, P13, and P14 DC Power Connector P7DC Power Connectors P10 DC Power Connector P12
Related manuals
Manual 63 pages 47.98 Kb Manual 63 pages 47.93 Kb

410 specifications

The Dell XPS 410, launched in the mid-2000s, was a prominent desktop computer known for its robust performance and modern design. Targeting both enthusiasts and everyday users, the XPS 410 emerged as a reliable option for gaming, media, and general computing tasks.

One of the standout features of the XPS 410 was its sleek and stylish appearance, designed to complement contemporary home and office environments. It boasted a stylish chassis with an integrated lighting system, showcasing Dell's commitment to aesthetics alongside functionality.

The XPS 410 was powered by Intel's Core 2 Duo processor, which offered significant improvements in performance and energy efficiency over its predecessors. Depending on the configuration, users could choose from various processors, allowing for customization based on personal needs. This flexibility made the XPS 410 suitable for resource-intensive applications, such as photo editing, video rendering, and gaming.

Accompanying the powerful processor was a choice of memory options, with support for up to 4GB of DDR2 RAM. This ample memory capacity ensured smooth multitasking and efficient handling of demanding software. Users could also enhance performance through options for high-speed graphics cards, with dedicated GPUs from NVIDIA and ATI, catering to the needs of gamers and graphic designers alike.

In terms of storage, the XPS 410 offered various hard drive configurations, with SATA drives ranging from 250GB to 750GB, ensuring ample space for files, applications, and multimedia. Additionally, with options for RAID configurations, users could benefit from increased data redundancy and improved performance.

The XPS 410 also incorporated advanced technologies such as Dell's Media Center remote control compatibility, allowing for convenient navigation and control of media applications. The inclusion of multiple USB ports and card reader slots made it easy for users to connect a variety of peripherals, enhancing the overall functionality of the system.

Another noteworthy aspect of the XPS 410 was its ability to run Windows Vista, further emphasizing its appeal during a time of transition in consumer operating systems. The combination of powerful hardware and versatile software offerings made the XPS 410 a favored choice among professionals and gamers alike.

In summary, the Dell XPS 410 was a well-rounded desktop computer, featuring powerful processors, ample memory and storage options, and an appealing design. It catered to a wide variety of users, providing performance and versatility that stood out in its era.