6.Follow the procedures in After Working Inside Your Computer.
Removing the Heat-Sink Assembly
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the:
a)VESA stand
b)back cover
c)VESA mount bracket
d)
3.Remove the screws that secure the thermal module to the chassis. Lift the
Installing the Heat-Sink Assembly
1.Align and place the
2.Tighten the screws to secure the
3.Install:
a)
b)VESA mount bracket
c)back cover
d)VESA stand
4.Follow the procedures in After Working Inside Your Computer.
Removing the Input/Output Board Shield
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the:
a)VESA stand
b)back cover
c)VESA mount bracket
d)
e)
3.Lift the input/output panel away from the computer.
24