Table 6. Power Management
Option | Description | |
|
| |
AC Recovery | Specifies how the computer will respond when AC power is applied after an AC | |
| power loss. You can set the AC Recovery to: | |
| • Power Off (selected by default) | |
| • | Power On |
| • | Last Power State |
Auto On Time | This option sets the time of the day when you would like the system to turn on | |
| automatically. Time is kept in standard | |
| startup time can be changed by typing the values in the time and A.M./P.M. fields. | |
| • Disabled — The system will not automatically power up. | |
| • Every Day — The system will power up every day at the time you specified | |
|
| above . |
| • Weekdays — The system will power up Monday through Friday at the time | |
|
| you specified above. |
| • Select Days — The system will power up on days selected above at the time | |
|
| you specified above. |
| NOTE: This feature does not work if you turn off your computer using the switch | |
| on a power strip or surge protector or if Auto Power is set to disabled. | |
Deep Sleep Control | Allows you to define the controls when Deep Sleep is enabled. | |
| • | Disabled |
| • Enabled in S5 only | |
| • Enabled in S4 and S5 | |
| This option is disabled by default. | |
Fan Control Override | Controls the speed of the system fan. | |
| • Fan Control Override (not selected) | |
| NOTE: When enabled, the fan runs at full speed. | |
USB Wake Support | This option allows you to enable USB devices to wake the computer from standby. | |
| • Enable USB Wake Support (not selected by default) | |
Wake on LAN/WLAN | This option allows the computer to power up from the off state when triggered by a | |
| special LAN signal. | |
| must be enabled in the operating system. This feature only works when the computer | |
| is connected to AC power supply. The options differ based on the form factor. |
• Disabled (selected by default) — Does not allow the system to power on by special LAN signals when it receives a
• LAN Only — Allows the system to be powered on by special LAN signals.
• WLAN Only — Allows the system to be powered on by special WLAN signals.
• LAN or WLAN — Allows the system to be powered on by special LAN or WLAN signals.
47