Installing the Converter Board
1.Place the convertor board into its place.
2.Tighten the screws that secure the converter board to the computer.
3.Connect the backlight and converter cables to the converter board.
4.Install the:
a)back cover
b)VESA stand
5.Follow the procedures in After Working Inside Your Computer.
Removing the System-Board Shield
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the:
a)VESA stand
b)back cover
c)VESA mount bracket
3.Remove the screws that secure the
Installing the System-Board Shield
1.Align and place the
2.Tighten the screws that secure the
3.Install the:
a)VESA mount bracket
b)back cover
c)VESA stand
4.Follow the procedures in After Working Inside Your Computer.
14