Dell 9010 owner manual Installing the Input/Output Board Shield, Removing the Power-Button Board

Installing the Input/Output Board Shield

1.Connect the power-connector cable.

2.Place the input/output board shield on the computer.

3.Pass the power connector and fix it to the socket. Tighten the screws to secure the input/output board shield to the chassis.

4.Tighten the screws that secure the power connector to the input/output shield.

5.Place the input/output panel on the computer.

6.Install:

a)power-supply fan

b)system-board shield

c)VESA mount bracket

d)back cover

e)VESA stand

7.Follow the procedures in After Working Inside Your Computer.

Removing the Power-Button Board

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the:

a)VESA stand

b)back cover

3.Disconnect the power-button cable from the board. Lift the power-button board from the chassis.

27