Dell 6430U Installing the Wlan / WiGig Card, Removing the Wireless Wide Area network Wwan Card

Page 15

NOTE: The WiGig card has three antenna cables.

Installing the WLAN / WiGig Card

1.Insert the WLAN/WiGig card into its connector at a 45–degree angle into its slot.

2.Press the WLAN/WiGig card down and tighten the screw to secure the WLAN/WiGig card to the computer.

3.Connect the antenna cables to their respective connectors marked on the WLAN/WiGig card.

NOTE: The WiGig card has three antenna cables that must be connected during installation.

4.Install:

a)base cover

b)SD card

c)battery

5.Follow the procedures in After Working Inside Your Computer.

Removing the Wireless Wide Area network (WWAN) Card

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

a)battery

b)SD card

c)base cover

3.Disconnect the antenna cables from the WWAN card.

4.Remove the screw that secures the WWAN card to the computer.

5.Disconnect the antenna cables from the WWAN card. Remove the screw that secures the WWAN card to the computer and remove it.

Installing the WWAN Card

1.Place the WWAN card in its slot in the system board.

2.Press the WWAN card down and tighten the screw to secure the WWAN card to the computer.

3.Connect the antenna cables to their respective connectors marked on the WWAN card.

15

Image 15

Contents Regulatory Model P36G Regulatory Type P36G001 Dell Inc Contents Installing the Thermal Module System SetupTroubleshooting Specifications Getting Help Contacting Dell Page Before Working Inside Your Computer Working on Your ComputerTurning Off Your Computer After Working Inside Your ComputerClick Shut Down System Overview Recommended ToolsInside view back Smart card board Installing the Secure Digital SD CardRemoving the Secure Digital SD Card Sniffer board System board Hall sensorRemoving the Base Cover Removing the BatteryInstalling the Battery Slide the battery into its slot until it clicks into placeRemoving the mSATA SSD Card Installing the Base CoverRemoving the Wlan / WiGig Card Installing the mSATA SSD CardInstalling the Memory Removing the MemoryInstalling the Wlan / WiGig Card Removing the Wireless Wide Area network Wwan CardInstalling the Wwan Card Removing the System Fan Installing the TAA BoardInstall Base cover SD card Battery Removing the TAA BoardRemoving the Keyboard Installing the System FanPage Flip the computer and remove the keyboard from the computer Installing the KeyboardRemoving the Palmrest Assembly Remove Battery SD card Base coverPage Installing the Palmrest Assembly Removing the Fingerprint-Scanner Board Removing the Power-Switch BoardInstalling the Power-Switch Board Remove Battery SD cardInstalling the Fingerprint-Scanner Board Base cover Keyboard Palmrest assemblyRemoving the Display Bezel Removing the Display Panel Installing the Display BezelInstalling the Display Panel Removing the Power LED Board Installing the Power LED BoardRemoving the Camera Removing the Speakers Installing the CameraRemoving the Coin-Cell Battery Installing the SpeakersRemoving the Bluetooth Card Installing the Coin-Cell BatteryInstalling the Bluetooth Card Removing the Smart-Card Board Installing the Smart-Card BoardRemoving the Smart-Card Cage Installing the Smart-Card CageInstalling the Hall Sensor Palmrest assembly Keyboard Base cover SD card BatteryRemoving the Hall Sensor Installing the Sniffer Board Removing the Display AssemblyRemoving the Sniffer Board Page Installing the Display Assembly Removing the Power ConnectorRemove Battery SD card Base cover Keyboard Removing the System Board Installing the Power ConnectorPage Installing the System Board Remove BatteryRemoving the Thermal Module Installing the Thermal Module Navigation Keys System Setup OverviewBoot Sequence Following table displays the system setup navigation keysUpdating the Bios Displays the System Setup help fileKeys Navigation Option Description System Setup OptionSystem Configuration GeneralEnable Smart Reporting RAID On This option is enabled by defaultDefault. The options are DefaultOption Description LCD Brightness You can also enable or disable Media CardBattery and On AC VideoSecure Boot Performance Power ManagementWireless Radio Control Default Setting Wake on AC is not selectedEnable USB Wake Support Default Setting Enable USB Wake Support is not selectedWireless Post BehaviorVirtualization Support System Logs MaintenanceDiagnostics Enhanced Pre-Boot System Assessment ePSA DiagnosticsBeep Codes Code Cause and Troubleshooting StepsCode LED Error CodesPage Type Four-channel high definition audio Controller Feature SpecificationOne Smart Card option Finger Print option Features SpecificationActive Area Axis 90 mm 3.54 inches 44 mm 1.73 inches Battery Non-Operating To 70 C -104 F to 158 F Feature DescriptionPage Contacting Dell Getting Help