Option | Description |
|
|
• Enable UEFI Network Stack: This allows you to enable UEFI Networking
|
| Protocols in |
SATA Operation | Allows you to configure the internal SATA | |
| • | Disabled |
| • | ATA |
| • | AHCI |
| • RAID On: This option is enabled by default. | |
Drives | Allows you to configure the SATA drives on board. All drives are enabled by | |
| default. The options are: | |
| • | |
| • |
|
SMART Reporting | This field controls whether hard drive errors for integrated drives are reported | |
| during system startup. This technology is part of the SMART (Self Monitoring | |
| Analysis and Reporting Technology) specification. This option is disabled by | |
| default. | |
| • | Enable SMART Reporting |
USB Configuration | This field configures the integrated USB controller. If Boot Support is enabled, the | |
| system is allowed to boot any type of USB Mass Storage Devices (HDD, memory | |
| key, floppy). | |
| If USB port is enabled, device attached to this port is enabled and available for OS. | |
| If USB port is disabled, the OS cannot see any device attached to this port. | |
| • | Enable Boot Support |
| • Enable External USB Port | |
|
| NOTE: USB keyboard and mouse always work in the BIOS setup irrespective |
|
| of these settings. |
USB PowerShare | This option configures the USB PowerShare feature behavior. | |
| This feature is intended to allow users to charge external devices, such as phones | |
| and portable music players, using the stored system battery power through the | |
| USB PowerShare port, even when the system is turned off. | |
| This option is disabled by default: | |
| • | Enable USB PowerShare |
Keyboard Illumination | This field lets you choose the operating mode of the keyboard illumination feature. | |
| The keyboard brightness level can be set from 25% to 100% | |
| • Disabled: This option is enabled by default. | |
| • | Level is 25% |
| • | Level is 50% |
| • | Level is 75% |
| • | Level is 100% |
44