Dell 6430U owner manual Removing the Smart-Card Cage, Installing the Smart-Card Cage

Page 32

5.Follow the procedures in After Working Inside Your Computer.

Removing the Smart-Card Cage

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

a)battery

b)SD card

c)base cover

d)keyboard

e)palmrest assembly

3.Disconnect the smart-card cable.

4.Remove the screws that secure the smart-card cage to the computer and remove it.

Installing the Smart-Card Cage

1.Place the smart-card cage in its slot on the computer.

2.Tighten the screws to secure the smart-card cage to the computer.

3.Connect the smart-card cable.

4.Install:

32

Image 32

Contents Regulatory Model P36G Regulatory Type P36G001 Dell Inc Contents Troubleshooting Installing the Thermal ModuleSystem Setup Specifications Getting Help Contacting Dell Page Working on Your Computer Before Working Inside Your ComputerClick Shut Down Turning Off Your ComputerAfter Working Inside Your Computer Recommended Tools System OverviewInside view back Installing the Secure Digital SD Card Removing the Secure Digital SD CardSniffer board System board Hall sensor Smart card boardRemoving the Battery Installing the BatterySlide the battery into its slot until it clicks into place Removing the Base CoverInstalling the Base Cover Removing the mSATA SSD CardInstalling the mSATA SSD Card Installing the MemoryRemoving the Memory Removing the Wlan / WiGig CardInstalling the Wwan Card Installing the Wlan / WiGig CardRemoving the Wireless Wide Area network Wwan Card Installing the TAA Board Install Base cover SD card BatteryRemoving the TAA Board Removing the System FanInstalling the System Fan Removing the KeyboardPage Installing the Keyboard Removing the Palmrest AssemblyRemove Battery SD card Base cover Flip the computer and remove the keyboard from the computerPage Installing the Palmrest Assembly Removing the Power-Switch Board Installing the Power-Switch BoardRemove Battery SD card Removing the Fingerprint-Scanner BoardRemoving the Display Bezel Installing the Fingerprint-Scanner BoardBase cover Keyboard Palmrest assembly Installing the Display Bezel Removing the Display PanelInstalling the Display Panel Removing the Camera Removing the Power LED BoardInstalling the Power LED Board Installing the Camera Removing the SpeakersInstalling the Speakers Removing the Coin-Cell BatteryInstalling the Coin-Cell Battery Removing the Bluetooth CardInstalling the Bluetooth Card Installing the Smart-Card Board Removing the Smart-Card BoardInstalling the Smart-Card Cage Removing the Smart-Card CageRemoving the Hall Sensor Installing the Hall SensorPalmrest assembly Keyboard Base cover SD card Battery Removing the Sniffer Board Installing the Sniffer BoardRemoving the Display Assembly Page Remove Battery SD card Base cover Keyboard Installing the Display AssemblyRemoving the Power Connector Installing the Power Connector Removing the System BoardPage Removing the Thermal Module Installing the System BoardRemove Battery Installing the Thermal Module System Setup Overview Boot SequenceFollowing table displays the system setup navigation keys Navigation KeysKeys Navigation Updating the BiosDisplays the System Setup help file System Setup Option System ConfigurationGeneral Option DescriptionRAID On This option is enabled by default Default. The options areDefault Enable Smart ReportingYou can also enable or disable Media Card Battery and On ACVideo Option Description LCD BrightnessSecure Boot Power Management PerformanceDefault Setting Wake on AC is not selected Enable USB Wake SupportDefault Setting Enable USB Wake Support is not selected Wireless Radio ControlVirtualization Support WirelessPost Behavior Maintenance System LogsEnhanced Pre-Boot System Assessment ePSA Diagnostics DiagnosticsCode Cause and Troubleshooting Steps Beep CodesLED Error Codes CodePage Feature Specification Type Four-channel high definition audio ControllerFeatures Specification One Smart Card option Finger Print optionActive Area Axis 90 mm 3.54 inches 44 mm 1.73 inches Battery Feature Description Non-Operating To 70 C -104 F to 158 FPage Getting Help Contacting Dell