Table 8. Power Management
Option | Description | |
|
| |
AC Behavior | Allows you to enable or disable the computer from turning on automatically when | |
| an AC adapter is connected. | |
| Default Setting: Wake on AC is not selected. | |
Auto On Time | Allows you to set the time at which the computer must turn on automatically. The | |
| options are: | |
| • | Disabled |
| • | Every Day |
| • | Weekdays |
| • | Select Days |
| Default Setting: Disabled | |
USB Wake Support | Allows you to enable USB devices to wake the system from Standby. | |
|
| NOTE: This feature is only functional when the AC power adapter is |
|
| connected. If the AC power adapter is removed during Standby, the system |
|
| setup will remove power from all of the USB ports to conserve battery power. |
| • Enable USB Wake Support | |
| • Default Setting: Enable USB Wake Support is not selected | |
Wireless Radio Control | Allows you to enable or disable the feature that automatically switches from wired | |
| or wireless networks without depending on the physical connection. | |
| • | Control WLAN Radio |
| • | Control WWAN Radio |
| • Default Setting: Control WLAN radio or Control WWAN radio is not | |
|
| selected |
Wake on LAN/WLAN | Allows you to enable or disable the feature that powers on the computer from the | |
| Off state when triggered by a LAN signal. | |
| • Disabled: This option is enabled by default | |
| • | LAN Only |
| • | WLAN Only |
| • | LAN or WLAN |
Block Sleep | This option lets you block entering to sleep (S3 state) in Operating System | |
| environment. | |
| Block Sleep (S3 state) - This option is disabled by default. | |
Primary Battery Charge | Allows you to select the charging mode for the battery. The options are: | |
Configuration | • Adaptive: This option is enabled by default. | |
| ||
| • | Standard |
| • | Express Charge |
| • | Primarily AC use |
| • | Custom |
If Custom Charge is selected, you can also configure Custom Charge Start and
Custom Charge Stop.
48