Dell 7810 Installing the Memory, Removing the Coin-Cell Battery, Installing the Coin-Cell Battery

Installing the Memory

1.Insert the memory module into the memory socket.

2.Press down on the memory module until the securing clips secure the memory in place.

NOTE: Tilting of DIMM during insertion can cause damage to the DIMM.

3.Install:

a.memory shroud

b.optical drive

c.computer cover

4.Follow the procedures in After Working Inside Your Computer.

Removing the Coin-Cell Battery

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

a.computer cover

b.PCIe cards (slot 2 – optional)

3.Press the release latch away from the battery to allow the battery to pop-up from the socket. Lift the coin-cell battery out of the computer.

Installing the Coin-Cell Battery

1.Place the coin-cell battery into the slot on the system board.

2.Press the coin-cell battery downward until the release latch springs back into place and secures it.

3.Install:

a.PCIe cards(slot 2 – optional)

b.computer cover

4.Follow the procedures in After Working Inside Your Computer.

Removing the Heatsink Assembly

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

a.computer cover

b.optical drive (required only for the removal of heatsink assembly for CPU1)

3.Perform the following steps:

25