Option | Description | |
|
|
|
|
| NOTE: SATA is configured to |
|
| support RAID mode. No SATA |
|
| operation support in Tower 7910. |
Tower 7910 | Allows you to configure the internal SATA | |
| The options are: | |
| • | Disabled |
| • | ATA |
| • | AHCI (Default) |
|
| NOTE: SATA is configured to support RAID mode. No SATA |
|
| operation support in Tower 7910. |
Drives |
|
|
Tower 5810 and Tower 7810 | Allows you to configure the SATA drives on board. The options | |
| are: | |
| • |
|
| • | |
| • | |
| • | |
| • | |
| • |
|
| Default Setting: All drives are enabled. | |
|
| NOTE: If the hard drives are connected to a RAID controller |
|
| card, the hard drives will display {none} in all the fields. The |
|
| hard drives can be seen in the RAID controller card BIOS. |
Tower 7910 | • | |
| • |
|
| Default Setting: All drives are enabled. | |
|
| NOTE: If the hard drives are connected to a RAID controller |
|
| card, the hard drives will display {none} in all the fields. The |
|
| hard drives can be seen in the RAID controller card BIOS. |
SMART Reporting | This field controls if the hard drive errors for the integrated | |
| drives are reported during system startup. This technology is | |
| part of the SMART (Self Monitoring Analysis and Reporting | |
| Technology) specification. | |
| • Enable SMART Reporting - This option is disabled by default. | |
USB Configuration | Allows you to enable or disable the internal USB configuration. | |
| The options are: | |
| • | Enable Boot Support |
| • Enable Front USB Ports | |
| • Enable internal USB ports | |
| • Enable rear USB Ports |
46