Dell 7810 owner manual COM2

Option		Description
		• Enable Legacy Option ROMs
		(Default)
Date/Time		Allows you to set the date and time. The
		changes to the system date and time
		takes effect immediately.
Table 3. System Configuration
Option	Description
Integrated NIC	Allows you to configure the integrated network controller. The
	options are:
	• Enable UEFI Network Stack
	•	Disabled
		NOTE: You can use the Disabled option, only if Active
		Management Technology (AMT) option is disabled.
	•	Enabled
	•	Enabled w/PXE (Default)
Integrated NIC 2	Allows you to configure the
	integrated network controller. The
	options are:
	•	Enabled (Default)
	•	Enabled w/PXE
		NOTE: This feature is supported
		only on Tower 7910.
Serial Port	Identifies and defines the serial port settings. You can set the
	serial port to:
	•	Disabled
	•	COM1 (Default)
	•	COM2
	•	COM3
	•	COM4

NOTE: The operating system may allocate resources even if the setting is disabled.

SATA Operation

Tower 5810 and Tower 7810 Allows you to configure the internal SATA hard-drive controller. The options are:

•Disabled

•ATA

•AHCI

•RAID On (Default)

45