Liberty Operator Panel
The Liberty printer operator panel has three buttons and four LEDs to indicate certain conditions.
1 | – Cancel Button | 3 | – Disc Button and LED |
|
|
|
|
2 | – Ink Cartridge Status LED | 4 | – Power Button and LED |
|
|
|
|
Cancel Button: Not used.
Ink Cartridge Status LED: Flashes when an ink cartridge is low on ink, incorrectly installed, or when the printer cover is open. To check the ink cartridge status, refer to “Ink Cartridge Status” on page 41.
Disc Button and LED: The Disc button is used to move the tray in and out, and to load a disc for manual printing used in testing alignments. The Disc LED shows the status if a disc is on the tray: lit to indicate a disc is present, off for disc absent.
Power Button and LED: The Power button is unused, as the printer is either on, or in Sleep mode (as controlled by the printer driver). The Power LED flashes when the printer is printing, or it indicates it is in an error state. Error conditions may be viewed at the Production Server, or in the status field inside the printer driver under the advanced tab.
35 | User Guide Reference |