6.Carefully remove the plastic tape from the new cartridge. Hold the ink cartridge so you do not touch the copper strip (see below). Do not remove the copper strips and do Not touch the ink nozzles!
1 – Plastic Tape
2 – Ink Nozzles
3 – Copper Strip
4 – Ink Cartridge
7. Install the ink cartridge into the cartridge cradle so the label is facing toward you.
1 – Cradle Latch
2 – Ink Cartridge
3 – Label
8.Push the ink cartridge firmly into position and close the cradle latch.
9.Close the top cover.
10.For best prints, the cartridges must aligned after replacing a cartridge. For more information about cartridge alignment, see “Align Ink Cartridges” section on page 23.
11.Press the autoloader’s operator button to resume operation. The LED inside the operator button should be off after pressing the operator button.
Warning
•Ink may be harmful if swallowed.
•Avoid contact with eyes.
•Ink contains nitrites. If ingested, seek immediate medical attention.
•Keep out of reach of children.
•Refilling ink cartridges may result in damage to the cartridge or printer.
•Rimage ink cartridges are not licensed for modification.
User Guide Reference | 40 |