Reloading Discs
The carousel may be reloaded at the time it runs out of discs, or it may be reloaded while discs are recording. To reload while orders are still in process, pause the Desktop 4500 by pressing the operator button. The carousel may be manually rotated to reload discs in the bins.
1.If an order is in process, pause the Desktop 4500 by pressing the operator button.
2.Manually remove the carousel and remove any completed discs.
The system picks all discs from the supply bins and places the completed discs in the output bins. Output bins are configured at the Production Server and may be viewed in the Production Server Parameters. Each bin is numbered on the carousel. Rejected discs may be dispersed in the output bins and may be identified by a reject label. The system will print a reject label if the Production Server is configured to print a reject label. Refer to the Reject Pattern Printing options located in the Printing Parameters.
3.Place discs to be recorded in the input bin(s) of the carousel. Bin #2 may be either input or output, depending on how the Production Server software is configured. Fill bin 2 if required.
4.At the Production Server, select Reset Input Bin in the Options menu. The supply and output bin status will be rechecked by the Production Server.
5.Press the operator button to resume operation. The button LED should be off, to process discs.
Installing the Carousel
Place the carousel on the carousel platter so the alignment hole is aligned with the alignment pin. Press the carousel down firmly.
1 | – Carousel | 3 | – Alignment Pin |
|
|
|
|
2 | – Alignment Hole | 4 | – Carousel Platter |
|
|
|
|
37 | User Guide Reference |