Dell B110 service manual Installing the System Board, Reinstall the fan assembly

9.Lift the system board out from the computer.

10.Place the system board that you just removed next to the replacement system board.

Visually compare the replacement system board to the existing system board to ensure that you have the correct part.

Installing the System Board

1.Transfer components from the existing system board to the replacement system board: a. Remove the memory modules and install them on the replacement board.

CAUTION: The microprocessor package can get hot. To avoid burns, ensure that the package has had sufficient time to cool before you touch it.

b.Remove the microprocessor package from the existing system board and transfer it to the replacement system board.

2.Configure the settings of the replacement system board.

Set the jumpers on the replacement system board so that they are identical to the ones on the existing board.

3.Place the system board inside the computer frame, place the heat-sink base on the system board, and then replace the screws that you removed in step 8 of the preceding procedure.

4.Reinstall the fan assembly.

5.Reinstall the microprocessor heat sink, and then lower the heat-sink shroud.

6.Reattach the cables to the system board.

7.Reinstall any cards.

8.Replace the floppy drive.

9.Replace the computer cover.