Dell 9020 AIO owner manual Installing the Memory, Removing the Vesa Mount Bracket

3.Lift the memory shield outwards.

4.Pry the retention clips away from the memory module until it pops-up. Lift and remove the memory module from its connector.

Installing the Memory

1.Align the notch on the memory-card with the tab in the system-board connector.

2.Press down on the memory module until the release tabs spring back to secure them in place.

3.Place the memory shield back into its place.

4.Install the:

a)back cover

b)VESA stand

5.Follow the procedures in After Working Inside Your Computer.

Removing the VESA Mount Bracket

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the:

a)VESA stand

b)back cover

3.Remove the screws that secure the VESA mount bracket to the computer. Lift the bracket away from the computer.

13