Installing the Antenna Module
1.Place the antenna module on the chassis.
2.Thread the antenna cable around the edges of the computer. Tighten the screws to secure the antenna module to the chassis
3.Install:
a)system board
b)
c)
d)power supply unit
e)processor fan
f)converter board
g)power and OSD buttons board
h)intrusion switch
i)hard drive
j)optical drive
k)WLAN card
l)input/output (I/O) board shield
m)
n)VESA mount bracket
o)back cover
p)VESA stand
4.Follow the procedures in After Working Inside Your Computer.
Removing the Display Panel
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the:
a)VESA stand
b)back cover
c)VESA mount bracket
d)
e)input/output (I/O) board shield
f)WLAN card
g)optical drive
h)hard drive
i)intrusion switch
j)power and OSD buttons board
k)converter board
l)
m)power supply unit
n)
o)processor fan
p)speakers
q)antenna module
r)system board
37