Dell 9020 AIO owner manual System Setup Options

Keys	Navigation
<Enter>	Allows you to select a value in the selected field (if applicable) or follow the link in the field.
Spacebar	Expands or collapses a drop‐down list, if applicable.
<Tab>	Moves to the next focus area.
	NOTE: For the standard graphics browser only.
<Esc>	Moves to the previous page till you view the main screen. Pressing <Esc> in the main screen
	displays a message that prompts you to save any unsaved changes and restarts the system.
<F1>	Displays the System Setup help file.

System Setup Options

NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not appear

Table 2. General

Option	Description
System Information	Displays the following information:
	• System Information - Displays BIOS Version, Service Tag, Asset Tag,
	Ownership Tag, Ownership Date, Manufacture Date, and Express Service
	Code.
	• Memory Information - Displays Memory Installed, Memory Available,
	Memory Speed, Memory Channels Mode, Memory Technology, DIMM A Size,
	DIMM B Size.
	• PCI Information - Displays SLOT1
	• Processor Information - Displays Processor Type, Core Count, Processor ID,
	Current Clock Speed, Minimum Clock Speed, Maximum Clock Speed,
	Processor L2 Cache, Processor L3 Cache, HT Capable, and 64-Bit
	Technology.
	• Device Information - Displays SATA-0, SATA-1, SATA-4,LOM MAC Address,
	and Video Controller Audio Controller, Wi-Fi Device, Bluetooth Device.
Boot Sequence	Allows you to specify the order in which the computer attempts to find an operating
	system. To change the boot order, select the device that you want to change in the
	list, which is available on the right-hand side. After you select the device, click up/
	down arrows or use your keyboard PgUp / PgDn keys to change the boot options
	order. You can also select or de-select from the list using the check-boxes available
	on the left hand side. You should enable the Legacy Option ROMs to setup the Legacy
	boot mode. This Legacy boot mode is not allowed when you enable the Secure Boot.
	The options are:
	• Boot Sequence - By default, the Windows Boot Manager check box is
	selected.
	NOTE: The default option might differ based on the operating system of
	your computer.
	• Boot List Option - The list options are Legacy and UEFI. By default, the option
	UEFI is selected.

NOTE: The default option might differ based on the operating system of your computer.

•Add Boot Option - Enables you to add a boot option.

•Delete Boot Option - Enables you to delete an existing boot option.

44