
Specifications
•Model Number: HT1108TNCGRU1
•Outlets: 11 – 6 Transformer Spaced
•Surge Protection: 4650 Joules
•Communication Protection: Combo RJ11/ 
 / 1 out
•Coaxial Protection: 1 Pair
•Electrical Rating: 125V/15A/1875W
•Maximum Peak Current: 225,000A
•UL Clamping Voltage: UL 1449 3rd/400V 
•EMI/RFI Filtration: 150 kHz to 100 MHz, up to 70dB
Troubleshooting
If the ON/OFF is
 switched off, the 15 AMP circuit breaker may have tripped. Examine your connected equipment and remove the device that is
 overloading the circuit. Then, the ON/OFF switch back to RESET.
If the Grounded indicator
 does not light
 when you plug in
 the surge protector, Move the surge protector to a different grounded 
 still
 does not light,
 return the product to the dealer for assistance. If the surge protector proves to be working properly, your outlets may not be properly grounded and need to be repaired by a professional
 electrician.
If the Grounded indicator
 turns off after a period of use, the surge protection has been depleted. Replace your surge protector.
If the Protected indicator
 does not light,
 the surge protectors AC line
 is
 no longer
 protected from surges. Replace the surge protector. The surge protector may have received a power surge or spike beyond its
 specified limits
 that might overload the protection circuitry and make it
 inactive.
 The surge protector absorbed enough of the surge to protect your connected equipment, but it
 will
 not protect against future surges and spikes.
If the 
 connected to the Master outlet:![]()
•The power consumption of Master outlet must be below 10 Watts for the 
 standby mode. In this case, please make sure Hibernate/ Sleep mode is
 also enabled on your computer under power management settings, or check with your computer’s manufacturer.
•The power consumption of Master outlet must be above 50 Watts to trigger the 
 the Master outlet.
Product Registration
Thank you for purchasing a CyberPower product. Prompt product registration entitles coverage under the Limited Warranty, and also allows the opportunity to be notified of product enhancements, upgrades, and other announcements. Registration is
 quick and easy at www.cpsww.com/register.
Need Additional Help?
Feel
 free to contact our Tech Support department with installation,
 troubleshooting, or general
 product questions. CyberPower Technical
 Support
Phone: 
Email: tech@cpsww.com
Web: www.CPSww.com
Mail: 4241 12th Avenue E, Suite 400 Shakopee, MN 55379
Hours of Operation:
 Monday – Friday, 8:00am – 5:00pm Central![]()
Limited Warranty
Read the following terms and conditions carefully before using the CyberPower HT1108TNCGRU1(the “Product”). By using the Product you consent to be bound by and become a party to the terms and conditions of this Limited Warranty (together referred to as this “Warranty”). If you do not agree to the terms and conditions of this Warranty, you should return the Product for a full
 refund prior to using it.![]()
Who Is Providing This Warranty?
CyberPower Systems (USA), Inc.
 (“CyberPower”) provides this Limited Warranty.
What Does This Warranty Cover?
This warranty covers defects in
 materials and workmanship in
 the Product under normal
 use and conditions.
What Is The Period Of Coverage?
This Warranty is
 for as long
 as the original
 owner owns the Product.
Who Is Covered?
This warranty only covers the original
 purchaser.
Coverage ends if
 you sell
 or otherwise transfer the Product.
How Do You Get Service?
1 Call
 us at (877) ![]()
![]()
2 When you contact CyberPower, identify
 the Product, the Purchase Date, and the item(s)
 of Connected Equipment. Have information
 on all
 applicable insurance
 or other resources of recovery/payment that are available to the Initial
 Customer and Request a Claim Number.
3 You must provide a purchase receipt (or other proof of the original
 purchase) and provide a description of the defect.
4 Pack and ship the product to CyberPower and, if
 requested, the item(s)
 of Connected Equipment, a repair cost estimate for the damage to the Connected Equipment, and all
 claim forms that CyberPower provides to you. Show the Claim Number on the shipping label![]()
 or include
 it
 with the product. You must prepay all
 shipping costs, you are responsible for packaging and shipment, and you must pay the cost of the repair estimate.
What Will We Do To Correct Problems?
CyberPower will
 inspect
 and examine the Product.
If the Product is
 defective in
 material
 or workmanship, CyberPower will
 repair or replace it
 at CyberPower's expense, or, if
 CyberPower is
 unable to or decides not to repair or replace the Product (if defective) within a reasonable time, CyberPower will
 refund to you the full
 purchase price you paid for the Product (purchase receipt showing price paid is
 required).
Who Pays For Shipping?
We pay when we send items
 to you;
 you pay when you send items
 to us.
What Are Some Things This Warranty Does Not Cover?
1 This Warranty does not cover any software that was damaged or needs to be replaced due to the failure of the Product or any data that is
 lost
 as a result of the failure or the restoration of data or records, or the reinstallation of software.
2 This Warranty does not cover or apply to:
 misuse, modification, operation or storage outside environmental
 limits
 of the Product or the equipment connected to it,
 nor for dam age while in
 transit or in
 storage, nor if
 there has been improper
 operation or maintenance, or use with items
 not designed or intended
 for use with the Product, such as laser
 printers, appliances, aquariums, medical
 or life
 support devices, etc.
What Are The Limitations?
1 This Warranty does not apply unless the Product and the equipment that was connected to it
 were connected to properly wired and grounded outlets (including compliance with electrical
 and safety codes of the most current electrical
 code), without the use of any adapters or other connectors.
2 The Product must have been plugged directly into
 the power source and the equipment connected to the Product must be directly connected to the Product and not 
 serial
 fashion with any extension cords, another Product or device similar to the Product, surge suppressor, or power tap. Any such installation
 voids the Limited Warranty.
3 The Product and equipment connected to it
 must have been used properly in
 a suitable and proper environment and in
 conformance with any license,
 instruction
 manual, or warnings provided with the Product and the equipment connected to it.![]()
4 The Product must have been used at all
 times within the limitations
 on the Product's VA capacity.
5 The sole and exclusive remedies of the Initial
 Customer are those provided by this Warranty.
Contact Information
CyberPower Systems, Inc.
4241 12th Ave. East Suite 400 Shakopee, MN 55379 Phone: (952) 
-free:
CyberPower is
 the warrantor under this Limited Warranty. You may also contact CyberPower on the web at CPSww.com
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is
 subject to the following two conditions: (1) this device may not cause harmful
 interference,
and (2) this device must accept any interference
received, including![]()
interference
that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This Class B digital
 apparatus complies with Canadian 
 are designed to provide reasonable protection against harmful
 interference
in
 a residential
 installation.
 This equipment generates, uses and can radiate radio frequency energy and, if
 not installed
 and used in
 accordance with the instructions,
may cause harmful
 interference
to radio communications. However, there is
 no guarantee that interference
will
 not occur in
 a particular installation.
 If this equipment does cause harmful
 interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is
 encouraged to try to correct the interference
by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into
 an outlet on a circuit different from that to which the receiver is
 connected. Consult the dealer or an experienced radio/TV technician for help.
©2011 CyberPower Systems (USA), Inc. All rights reserved. All other trademarks are the property of their respective owners.
CyberPower Systems (USA), Inc
4241 12th Ave. East, Suite 400
Shakopee, MN 55379
Phone: 
CPSww.com