Sony VPL-DS100 manual Specifications, Optical, Signals, General

SPECIFICATIONS

Optical
	Projection System		3 LCD panels, 1 lens projection system
	Panel		Super high aperture 0.62-inch TFT LCD 1,440,000 pixels (480,000 pixels x 3)
	Projection lens		1.2 times F2.2 to 2.4 f18.0 to 21.6mm
	Lamp		185W UHP
	Screen coverage		40'' to 150'' (measured diagonally)
	Light Output		1200ANSI lm (lamp mode high)
	Throwing Distance	40-inch	: 1.1 to 1.4 m (3.6 to 4.6 feet)
		60-inch	: 1.7 to 2.1 m (5.6 to 6.9 feet)
		80-inch	: 2.3 to 2.8 m (7.5 to 9.2 feet)
		100-inch	: 2.9 to 3.5 m (9.5 to 11.5 feet)
		120-inch	: 3.5 to 4.2 m (11.5 to 13.8 feet)
		150-inch	: 4.4 to 5.3 m (14.4 to 17.4 feet)
Signals
	Color System		NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N
	Resolution	Video	600TV lines
		RGB	800 x 600
	Acceptable Signals	Computer	fH: 19-72 kHz, fV: 48-92 Hz (up to XGA (fV: 85 Hz))
		Video	RGB/Component 50/60 Hz, Composite video, Y/C video, 480/60 i, 575/50 i
			HDTV: 1080/60 i, 480/60 p, 575/50 p, 1080/50 i, 720/60 p, 720/50 p, 540/60 p
General
	Speaker		Mono 1 W (max.) x 1
	Power Requirements		AC 100 to 240 V, 50/60 Hz
	Power Consumption	Max	250 W
		Standby	4.6 W
	Operating Temperature		0 to 35 degrees Celsius (32 to 95 F)
	Operating Humidity		35% to 85% (no condensation)
	Dimension (WxHxD)	inch	11 5/8 x 3 1/8 x 9 3/8
		mm	295 x 78 x 238
	Weight	lb	Approx. 6 lbs., 3 oz.
		kg	Approx. 2.8 kg
	Heat Dissipation		853.1BTU
INPUT
	Input	RGB/Component	Analog RGB (HD D-sub 15 pin x 1)
		S-Video	S-Video (Mini DIN 4pin x 1)
		Composite	Composite video (RCA pin x 1)
		Audio	mono (stereo mini x 1)
	Safety Regulations		UL60950, cUL (CSA No.60950), FCC Class B, IC Class B,
			NEMCO (EN60950), CE (LVD, EMC), C-Tick
	Supplied Accessories		Remote Commander (RM-PJ2), Lithium battery, HD D-sub 15 pin cable,
			Soft case, Air filter, Operating Instructions, Quick reference sheet, Security label

Control Panel Connector Panel

·Halogenated flame retardants are not used in cabinets.

·Halogenated flame retardants are not used in printed wiring boards.

·Lead-free solder is used for soldering.

·Polystyrene foam for the packaging cushions is not used in packaging.

Sony Electronics Inc.

1 Sony Drive

Park Ridge, NJ 07656 www.sony.com/projectors

MK10074V1IW03SEP

DI-0064

©2004 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without permission is prohibited.

Features and specifications are subject to change without notice. All non-metric weights and measures are approximate.

Sony and Remote Commander are registered trademarks of Sony.

Printed in USA (1/04)