LIEBERT MP™ ADVANCED POWER STRIPS
QUICK-START GUIDE: OPENCOMMS EM OR MP ADVANCED ACCESS SERVER
SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
This manual contains important safety instructions. Read all safety, installation and operating instructions before installing the Liebert MP Advanced Power Strip or Access Server. Adhere to all warnings on the unit and in this manual. Follow all operating and user instructions. Individuals without previous training can install and operate this equipment.
The Liebert MP Advanced Power Strip and Access Server are not intended for use with life support or other designated critical devices. Maximum load must not exceed that shown on the Liebert MP Advanced Power Strip or Access Server rating label. The Liebert MP Advanced Power Strip and Access Server are designed for data processing equipment. If uncertain, consult your local dealer or Liebert representative.
! WARNING
Opening or removing the cover of MP Advanced Power Strips or Access Servers may expose you to lethal voltages within the unit.
Observe all cautions and warnings in this manual. Failure to do so may result in serious injury or death. Do not attempt to service this product yourself. Refer all service to qualified service personnel. Never work alone.
Operate the Liebert MP Advanced Power Strip and Access Server in an indoor environment only in an ambient temperature range of 32°F to +104°F (0°C to +40°C). Install it in a clean environment, free from conductive contaminants, moisture, flammable liquids, gases and corrosive substances.
! WARNING
The Liebert MP Advanced Power Strip and Access Server contain no user serviceable parts. Under no circumstances attempt to gain internal access due to risk of electric shock or burn. Do not continue to use the Liebert MP Advanced Power Strip or Access Server if the LED panel or monitoring interface indicators are not in accordance with these operating instructions. Refer all faults to your local dealer or Liebert representative.
Never block or insert any object into the Liebert MP Advanced Power Strip or Access Server.
DO NOT CONNECT equipment that could overload the Liebert MP Advanced Power Strip or Access Server.
Refer to the Liebert MP Advanced Power Strip and Access Server user manual,
! CAUTION
Connecting your Liebert MP Advanced Power Strip, Access Server or rack equipment to a power supply with an incorrect rating in either voltage, amperes or phase may damage the connected equipment and your Liebert MP Advanced Power Strip or Access Server.
If you have questions about the power supply connections, contact your local Liebert representative or Liebert Technical Support at
! CAUTION
Shut down and unplug all equipment in your rack enclosure before beginning to connect the equipment to your Liebert MP Advanced Power Strip or Access Server.
1