When connecting the rack equipment to the Liebert MP Advanced Power Strip’s receptacles, arrange cables and connections to avoid tangling and crisscrossing the power cables.
For power management purposes, record the receptacle where each piece of equipment is connected. Receptacles on the Liebert MP Advanced Power Strip have a numerical designation. Liebert MP Advanced Power Strips with more than one circuit are named with numbers and letters.
When connecting power to the Liebert MP Advanced Power Strip’s receptacles, follow generally accepted procedures, such as routing the power cables separately from
! CAUTION
All configuration steps in this quick start guide must be completed before attempting to start up equipment connected to the Liebert MP Advanced Power Strip or Access Server.
WHAT’S INCLUDED
Make sure you have all the items that should be included with your Liebert MP Advanced Power Strip and Access Server. If any item is missing or damaged in shipping, file a damage claim
•
•
•2 mounting brackets and 4 screws
•
•User manual
| Serial Ports - Connect either |
|
|
| ||
DCN Power Port | to Power Strip |
|
|
| ||
|
|
|
|
|
| |
| DCN | Sensor | Sensor Modem | Serial | Serial | Ethernet |
|
| 2 | 1 | 2 | 1 |
|
Ethernet Port
Liebert OpenComms EM
(EM PDU Controller)
Liebert MP
Advanced
Power Strip
Mounting Bracket on either side
POWER 1 3 5 8 | ||
|
|
|
|
|
|
2 4 6 8
CONFIGURATION WITH OPENCOMMS EM
1.Connect power to the DCN port on the OpenComms EM and to your MP Advanced Power Strip.
2.Connect the
3.Connect the other end
4.Connect a
2