D-Link TM-G5240 user manual Home Dhcp

Page 44

T-Mobile TM-G5240 Wireless Router User Manual

Version 0.7 041807

Home > DHCP

DHCP stands for Dynamic Host Control Protocol. The TM-G5240 has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the TM-G5240. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool.

At the Home > DHCP tab, you can adjust:

•DHCP Server - Select Enabled or Disabled. The default setting is Enabled.

•Starting IP Address - The starting IP address for the DHCP server’s IP assignment.

•Ending IP Address - The ending IP address for the DHCP server’s IP assignment.

•Lease Time - The length of time for the IP address lease. Enter the Lease time. The default setting is one hour.

41

Image 44

Contents Mobile TM-G5240 Wireless Router Table of Contents Windows 95, 98, and ME Windows Vista Windows 2000 and XP TM-G5240 Wireless Router What is unique about the TM-G5240TM-G5240 Features Technical specifications Physical Dimensions Wireless Transmit PowerPower Input WeightPackage contents Panel components Back panelPower Light Front panelWhat you need before installing the TM-G5240 Other installation considerationsVersion 0.7 Configuring TM-G5240 Configure the TM-G5240Physical connection of hardware components Version 0.7 Version 0.7 Version 0.7 Version 0.7 Version 0.7 Version 0.7 Version 0.7 Version 0.7 Checks Internet Connection Type Configuration of TM-G5240 Dhcp CableStatic IP Pppoe DSLVersion 0.7 Version 0.7 Version 0.7 Page Encryption for your wireless computers Tips for Get Security Key Advanced Settings Configuration menuVersion 0.7 Home tab Home WizardHome Wireless AuthenticationWPA2 WPA-AutoVersion 0.7 Home WAN Home WAN Dynamic IP AddressVersion 0.7 Home WAN Static IP Address Secondary DNS Address -This is optionalHome WAN PPPoE Connect Mode Home LAN Home Dhcp Home Bridge Mode Advanced tab Advanced Virtual ServerVirtual Server Select Enabled or Disabled ExampleExample Advanced Applications Version 0.7 Advanced Filters Advanced Filters IP FiltersAdvanced Filters URL Blocking Advanced Filters Domain Blocking At Advanced Parental Control, you can adjust Advanced Parental ControlAdvanced Firewall Version 0.7 Advanced DMZ Advanced Performance Version 0.7 Tools Admin Tools tabVersion 0.7 Tools Time Tools System Tools Firmware Tools Ddns Tools Misc Version 0.7 Tools Cable Test Tools Pairing WAN Status tabStatus Device Info Wireless Status Log Log Settings Status LogStatus Statistics Status Wireless Help tab Introduction Can’t connect to the InternetCD will not run when I insert it into the CD-ROM drive Want to use a broadband modem with a USB connectionCan’t wirelessly connect to the TM-G5240 My wireless connection keeps droppingWant to modify TM-G5240 settings Reset to factory default settingHow do I find the IP address Windows 95, 98, and MEWindows Vista Windows 2000 and XPHow do I assign a static IP address Windows XPWindows Windows 98 and MEClick Specify an IP Address Click Clone Mac Address How can I set up TM-G5240 to work with a cable modemDynamic cable connection Static cable connection Version 0.7 Version 0.7 Version 0.7 How do I open ports on the TM-G5240 Version 0.7 Version 0.7 Version 0.7 Limited Warranty Submitting a Claim Trademarks