D-Link How can I set up TM-G5240 to work with a cable modem, Dynamic cable connection

Page 84

T-Mobile TM-G5240 Wireless Router User Manual

Version 0.7 041807

How can I set up TM-G5240 to work with a cable modem

Dynamic cable connection

Note: Please configure the TM-G5240 with the computer that was last connected directly to the cable modem. Try running the CD that came with the router first. If that does not work, follow the steps below.

1.Access the TM-G5240’s Configuration menu by typing the TM-G5240’s IP address in your Web browser. The default IP address is 192.168.0.1.

2.Login using your password. The default username is “admin” and the password is blank.

3.At the Configuration menu, click the Home tab and click the WAN button.

4.Make sure Dynamic IP Address is selected.

5.Click Clone Mac Address.

6.Click on Apply and then Continue to save the changes.

7.Power cycle the cable modem and TM-G5240:

Turn the cable modem off first. Turn the router off for two minutes. Turn the cable modem on first. Wait until you get a solid cable light on the cable modem and then turn the TM-G5240 on. Wait 30 seconds.

Note: If you have a Motorola (Surf Board) modem, leave off for at least 5 minutes.

8.Access the Configuration menu again.

9.Click the Status tab and click the Device Info button. If you do not already have a public IP address under the WAN heading, click DHCP Renew and then click Continue.

81

Image 84
Contents Mobile TM-G5240 Wireless Router Table of Contents Windows 95, 98, and ME Windows Vista Windows 2000 and XP TM-G5240 Wireless Router What is unique about the TM-G5240TM-G5240 Features Technical specifications Physical Dimensions Wireless Transmit PowerPower Input WeightPackage contents Panel components Back panelPower Light Front panelWhat you need before installing the TM-G5240 Other installation considerationsVersion 0.7 Configuring TM-G5240 Configure the TM-G5240Physical connection of hardware components Version 0.7 Version 0.7 Version 0.7 Version 0.7 Version 0.7 Version 0.7 Version 0.7 Version 0.7 Checks Internet Connection Type Configuration of TM-G5240 Dhcp CableStatic IP Pppoe DSLVersion 0.7 Version 0.7 Version 0.7 Page Encryption for your wireless computers Tips for Get Security Key Advanced Settings Configuration menuVersion 0.7 Home tab Home WizardHome Wireless AuthenticationWPA2 WPA-AutoVersion 0.7 Home WAN Home WAN Dynamic IP AddressVersion 0.7 Home WAN Static IP Address Secondary DNS Address -This is optionalHome WAN PPPoE Connect Mode Home LAN Home Dhcp Home Bridge Mode Advanced tab Advanced Virtual ServerVirtual Server Select Enabled or Disabled ExampleExample Advanced Applications Version 0.7 Advanced Filters Advanced Filters IP FiltersAdvanced Filters URL Blocking Advanced Filters Domain Blocking At Advanced Parental Control, you can adjust Advanced Parental ControlAdvanced Firewall Version 0.7 Advanced DMZ Advanced Performance Version 0.7 Tools Admin Tools tabVersion 0.7 Tools Time Tools System Tools Firmware Tools Ddns Tools Misc Version 0.7 Tools Cable Test Tools Pairing Status tab Status Device InfoWAN Wireless Status Log Log Settings Status LogStatus Statistics Status Wireless Help tab Introduction Can’t connect to the InternetCD will not run when I insert it into the CD-ROM drive Want to use a broadband modem with a USB connectionCan’t wirelessly connect to the TM-G5240 My wireless connection keeps droppingWant to modify TM-G5240 settings Reset to factory default settingHow do I find the IP address Windows 95, 98, and MEWindows Vista Windows 2000 and XPHow do I assign a static IP address Windows XPWindows Windows 98 and MEClick Specify an IP Address How can I set up TM-G5240 to work with a cable modem Dynamic cable connectionClick Clone Mac Address Static cable connection Version 0.7 Version 0.7 Version 0.7 How do I open ports on the TM-G5240 Version 0.7 Version 0.7 Version 0.7 Limited Warranty Submitting a Claim Trademarks