D-Link TM-G5240 user manual Version 0.7

Page 90

T-Mobile TM-G5240 Wireless Router User Manual

Version 0.7 041807

6.At Private IP, type the IP address of the computer on your local network that you want to allow the incoming service to.

7.Select TCP, UDP, or Both for the protocol type. If you are not sure, select Both.

8.Type the port information next to Private Port and Public Port. The private and public ports are usually the same. The public port is the port seen from the WAN side, and the private port is the port being used by the application on the computer within your local network.

9.Type the Schedule information.

10.Click Apply and then click Continue.

Note: Make sure DMZ host is disabled. If DMZ is enabled, it will disable all Virtual Server entries. Because the TM-G5240 uses NAT (Network Address Translation), you can only open a specific port to one computer at a time. For example, if you have two Web servers on your network, you cannot open port 80 to both computers. You will need to configure one of the Web servers to use port 81. Now you can open port 80 to the first computer and then open port 81 to the other computer. For more information, visit http://support.dlink.com/faq/view.asp?prod_id=1191.

87

Image 90

Contents Mobile TM-G5240 Wireless Router Table of Contents Windows 95, 98, and ME Windows Vista Windows 2000 and XP TM-G5240 Wireless Router What is unique about the TM-G5240TM-G5240 Features Technical specifications Power Input Physical DimensionsWireless Transmit Power WeightPackage contents Panel components Back panelPower Light Front panelWhat you need before installing the TM-G5240 Other installation considerationsVersion 0.7 Configuring TM-G5240 Configure the TM-G5240Physical connection of hardware components Version 0.7 Version 0.7 Version 0.7 Version 0.7 Version 0.7 Version 0.7 Version 0.7 Version 0.7 Checks Internet Connection Type Configuration of TM-G5240 Dhcp CableStatic IP Pppoe DSLVersion 0.7 Version 0.7 Version 0.7 Page Encryption for your wireless computers Tips for Get Security Key Advanced Settings Configuration menuVersion 0.7 Home tab Home WizardHome Wireless AuthenticationWPA2 WPA-AutoVersion 0.7 Home WAN Home WAN Dynamic IP AddressVersion 0.7 Home WAN Static IP Address Secondary DNS Address -This is optionalHome WAN PPPoE Connect Mode Home LAN Home Dhcp Home Bridge Mode Advanced tab Advanced Virtual ServerVirtual Server Select Enabled or Disabled ExampleExample Advanced Applications Version 0.7 Advanced Filters Advanced Filters IP FiltersAdvanced Filters URL Blocking Advanced Filters Domain Blocking At Advanced Parental Control, you can adjust Advanced Parental ControlAdvanced Firewall Version 0.7 Advanced DMZ Advanced Performance Version 0.7 Tools Admin Tools tabVersion 0.7 Tools Time Tools System Tools Firmware Tools Ddns Tools Misc Version 0.7 Tools Cable Test Tools Pairing Status tab Status Device InfoWAN Wireless Status Log Log Settings Status LogStatus Statistics Status Wireless Help tab Introduction Can’t connect to the InternetCD will not run when I insert it into the CD-ROM drive Want to use a broadband modem with a USB connectionCan’t wirelessly connect to the TM-G5240 My wireless connection keeps droppingWant to modify TM-G5240 settings Reset to factory default settingHow do I find the IP address Windows 95, 98, and MEWindows Vista Windows 2000 and XPWindows How do I assign a static IP addressWindows XP Windows 98 and MEClick Specify an IP Address How can I set up TM-G5240 to work with a cable modem Dynamic cable connectionClick Clone Mac Address Static cable connection Version 0.7 Version 0.7 Version 0.7 How do I open ports on the TM-G5240 Version 0.7 Version 0.7 Version 0.7 Limited Warranty Submitting a Claim Trademarks