D-Link DSL-504G manual Hub or Switch to Router Connection

Page 18

DSL-504G ADSL Router User’s Guide

Hub or Switch to Router Connection

Connect the Router to an uplink port on an Ethernet hub or switch with a straight-through cable as shown in the diagram below:

If you wish to reserve the uplink port on the switch or hub for another device, connect to any on the other MDI-X ports (1x, 2x, etc.) with a crossed cable.

Power On Router

To power on the Router:

1.Insert the AC Power Adapter cord into the power receptacle located on the rear panel of the Router and plug the adapter into a suitable nearby power source.

2.You should see the Power LED indicator light up and remain lit. The Status LED should light solid green and begin to blink after a few seconds.

3.If you have the Router connected to your network you can look at the Ethernet Link/Act LED indicators to make sure they have valid connections. The Router will attempt to establish the ADSL connection, if the ADSL line is connected and the connection is properly configured this should light up after several seconds. To configure the ADSL connection, read the instructions contained in the following chapters.

Factory Reset Button

The Router may be reset to the original factory default settings by depressing the reset button for a few seconds while the device is powered on. Use a ballpoint or paperclip to push down the reset button. Remember that this will wipe out any settings stored in flash memory including IP settings. The factory default IP address of the Router is 10.1.1.1 and the subnet mask is 255.0.0.0.

10

Page 17 Page 19
Image 18
Page 17 Page 19
Contents DSL-504G Adsl Router CE Mark Warning Limited Warranty What You Must Do For Warranty Service DSL-504G Adsl Router User’s Guide Contents RIP Page Installation Requirements About This User’s GuideBefore You Start Ethernet Port NIC Adapter Record Your Account InformationInformation you will need about your LAN or computer What is ADSL? Router Description and OperationRouter Features Status PowerFront Panel Display Adsl Link/ActRear Panel Connections Power on Router Factory Reset ButtonConnect Router to Ethernet Network ConnectionsConnect Adsl Line Computer to Router ConnectionHub or Switch to Router Connection Configuring IP Settings on Your Computer Wan Configuration SummaryConfigure Windows XP for Dhcp DSL-504G Adsl Router User’s Guide DSL-504G Adsl Router User’s Guide Configure Windows 2000 for Dhcp WindowsWindows 95, 98, ME Windows NT 4.0 workstationsDSL-504G Adsl Router User’s Guide Access the Web Manager Check for Proxy service in Windows Internet ExplorerUsing the Web Manager Using the Setup Wizard DSL-504G Adsl Router User’s Guide PPPoE/PPPoA Connections Dynamic IP Address ConnectionsStatic IP Address Connections Bridge ConnectionsDSL-504G Adsl Router User’s Guide Configure WAN Connection WAN Settings Menu PPPoE / PPPoAPPPoE and PPPoA Connection for WAN WAN Settings Menu Bridge Mode Bridged Connection for WANWAN Settings Dynamic IP Address Dynamic IP Address for WAN ConnectionWAN Settings Static IP Static IP Address for WAN ConnectionLAN IP Settings Configure LAN IP settingsDhcp Server Settings for the LAN Configure Dhcp server settings for the LANUse the ISP’s Dhcp Server Disable the Dhcp ServerUse the Router for Dhcp Dhcp Server RelayDNS Server Settings Configure DNS IP addressSave New Settings Save Settings and Restart the RouterAdvanced configuration menus Directory Configuration and Read-only MenusNAT NAT Configuration Virtual ServerPrivate Port Private IPProtocol Type Public PortFilters Configuration Menu FiltersSource Port Source IPDestination IP Destination PortFirewall Attacks Port ScansStatic Routing Static Routing menuSend Mode Receive ModeIf Name Adsl Modulation Settings PPP SettingsATM VC Configure Multiple PVCs Multiple Virtual Connections12. Configure new VC Change System Password Tools and UtilitiesConfigure System Time 15. Time Settings MenuSave Router Configuration Settings Ping TestSave Configuration File to PC Load Saved Configuration FilesRestore Factory Default Settings Firmware Upgrade 18. Firmware UpgradeRouter Status Information Device Information DisplayAdsl Status LogTraffic Statistics 22. Traffic StatisticsRate Standards & ProtocolsData Transfer Media InterfacePhysical and Environmental CE Class B, FCC Class B PartIn-line Filter Installation In-Line FiltersDSL-504G Split Line Filter Installation Split Line FilterPage Offices Registration Card Print, type or use block letters

DSL-504G specifications

The D-Link DSL-504G is a versatile and reliable ADSL modem router designed to meet the needs of both home and small office users seeking high-speed internet connectivity. This device seamlessly combines a DSL modem and a wireless router, providing users with an all-in-one solution for their networking needs. Its robust features and advanced technology make it a popular choice in the marketplace.

One of the standout features of the D-Link DSL-504G is its support for ADSL2/2+ technology, which significantly enhances the broadband experience by enabling faster download speeds of up to 24 Mbps. This technology ensures that users can enjoy smooth streaming, quick downloads, and efficient web browsing. With its Auto-ADSL feature, the modem automatically detects the type of DSL connection, simplifying the setup process for users.

In addition to its impressive DSL capabilities, the DSL-504G comes equipped with a built-in 4-port Ethernet switch, allowing users to connect multiple devices directly to the modem via Ethernet cables. This feature is particularly useful for users with desktop computers or gaming consoles that require a stable wired connection. Wireless connectivity is facilitated by IEEE 802.11g standards, offering wireless data rates of up to 54 Mbps, and backward compatibility with 802.11b devices. The built-in Wi-Fi capability ensures that users can connect multiple wireless devices such as laptops, smartphones, and tablets without the need for additional hardware.

Security is another important aspect of the D-Link DSL-504G. It supports WPA/WPA2 encryption protocols to protect user data and prevent unauthorized access to the network. The modem router also features a built-in firewall, which helps to safeguard against external threats and provides further peace of mind for users concerned about their online security.

The DSL-504G is designed for easy installation and management, with a user-friendly web interface that simplifies configuration settings. This interface allows users to easily customize their network settings, manage connected devices, and monitor network performance.

Overall, the D-Link DSL-504G is a feature-rich ADSL modem router that caters to the needs of modern users, combining high-speed connectivity, advanced security features, and ease of use in a single, compact device. Whether for home or office use, it delivers a reliable internet experience that users can depend on.
Top Page Image Contents