D-Link DSL-504G manual Private IP, Protocol Type, Private Port, Public Port

Page 46

DSL-504G ADSL Router User’s Guide

To configure a virtual server set, define the following settings in the Virtual Server configuration menu located in the top half of the browser window.

 

Network Address Translation (NAT) can be enabled or disabled system wide.

NAT

Under certain circumstances it may be desirable to disable NAT, however this

will render other router functions (such as DHCP) useless. Most users will

 

 

leave NAT enabled.

 

 

 

This is the IP address of the server on your LAN that will provide the service

 

to remote users. The Private IP address is used to direct the service to a

Private IP

specific computer on your private network such as an FTP, Email or public

 

web server. Type in the IP address of the server used for the service being

 

configured here.

 

You can select the transport protocol (TCP or UDP) that the application on

 

the virtual server will use for its connections. Select to redirect TCP, UDP or

Protocol Type

Both (All) types of packets from the pull-down menu. The choice of this

protocol is dependent on the application that is providing the service. If you

 

 

do not know which protocol to choose, check your application’s

 

documentation.

 

This is the TCP/UDP port on LAN (Private) interface. Keep in mind that if you

 

use a non-standard port number for an application with a reserved UDP/TCP

Private Port

port, some additional configuration may be required for the servers or

workstations using the application on the LAN side.

 

Port redirection must be used with a specified server or computer on the LAN

 

(identified by the Private IP address).

 

The Public Port is the TCP/UDP port on the WAN interface. Select one of the

 

following options from the pull-down menu to define a Single Port, Range of

 

Ports, Any Port or Safe Ports (ports above 1024). If you are redirecting a

Public Port

single standard TCP/UDP port from the WAN to the LAN, select the Single

 

Port option and use the standard port number here (such as port 23 for Telnet

 

or port 25 for SMTP). If choose the Any Port option, all TCP/UDP traffic will

 

be directed as specified.

Click the Apply button to put the new virtual server configuration set or modification into effect. Any server sets configured in the menu will appear in the Virtual Server List with the new settings. The Router must save the new settings and reboot before the new virtual server configurations are applied.

To remove any configuration set from the Virtual Server List, click on the trashcan icon for set you want to delete.

 

 

 

 

Some applications require multiple TCP or UDP ports to function properly.

 

 

 

 

Applications such as Internet gaming, video conferencing, and Internet telephony

 

 

 

 

are some examples of applications that often require multiple connections. These

 

 

 

 

 

Note

 

 

applications often conflict with NAT, and therefore require special handling. See the

 

 

 

 

discussion of DMZ configuration below.

38

Page 45 Page 47
Image 46
Page 45 Page 47
Contents DSL-504G Adsl Router CE Mark Warning Limited Warranty What You Must Do For Warranty Service DSL-504G Adsl Router User’s Guide Contents RIP Page About This User’s Guide Installation RequirementsBefore You Start Ethernet Port NIC Adapter Record Your Account InformationInformation you will need about your LAN or computer What is ADSL? Router Description and OperationRouter Features Status PowerFront Panel Display Adsl Link/ActRear Panel Connections Power on Router Factory Reset ButtonConnect Router to Ethernet Network ConnectionsConnect Adsl Line Computer to Router ConnectionHub or Switch to Router Connection Configuring IP Settings on Your Computer Wan Configuration SummaryConfigure Windows XP for Dhcp DSL-504G Adsl Router User’s Guide DSL-504G Adsl Router User’s Guide Configure Windows 2000 for Dhcp WindowsWindows 95, 98, ME Windows NT 4.0 workstationsDSL-504G Adsl Router User’s Guide Access the Web Manager Check for Proxy service in Windows Internet ExplorerUsing the Web Manager Using the Setup Wizard DSL-504G Adsl Router User’s Guide PPPoE/PPPoA Connections Dynamic IP Address ConnectionsStatic IP Address Connections Bridge ConnectionsDSL-504G Adsl Router User’s Guide Configure WAN Connection WAN Settings Menu PPPoE / PPPoAPPPoE and PPPoA Connection for WAN WAN Settings Menu Bridge Mode Bridged Connection for WANWAN Settings Dynamic IP Address Dynamic IP Address for WAN ConnectionWAN Settings Static IP Static IP Address for WAN ConnectionLAN IP Settings Configure LAN IP settingsDhcp Server Settings for the LAN Configure Dhcp server settings for the LANUse the ISP’s Dhcp Server Disable the Dhcp ServerUse the Router for Dhcp Dhcp Server RelayDNS Server Settings Configure DNS IP addressSave New Settings Save Settings and Restart the RouterAdvanced configuration menus Directory Configuration and Read-only MenusNAT NAT Configuration Virtual ServerPrivate Port Private IPProtocol Type Public PortFilters Configuration Menu FiltersSource Port Source IPDestination IP Destination PortFirewall Attacks Port ScansStatic Routing Static Routing menuReceive Mode Send ModeIf Name Adsl Modulation Settings PPP SettingsATM VC Configure Multiple PVCs Multiple Virtual Connections12. Configure new VC Change System Password Tools and UtilitiesConfigure System Time 15. Time Settings MenuSave Router Configuration Settings Ping TestLoad Saved Configuration Files Save Configuration File to PCRestore Factory Default Settings Firmware Upgrade 18. Firmware UpgradeRouter Status Information Device Information DisplayAdsl Status LogTraffic Statistics 22. Traffic StatisticsRate Standards & ProtocolsData Transfer Media InterfacePhysical and Environmental CE Class B, FCC Class B PartIn-line Filter Installation In-Line FiltersDSL-504G Split Line Filter Installation Split Line FilterPage Offices Registration Card Print, type or use block letters

DSL-504G specifications

The D-Link DSL-504G is a versatile and reliable ADSL modem router designed to meet the needs of both home and small office users seeking high-speed internet connectivity. This device seamlessly combines a DSL modem and a wireless router, providing users with an all-in-one solution for their networking needs. Its robust features and advanced technology make it a popular choice in the marketplace.

One of the standout features of the D-Link DSL-504G is its support for ADSL2/2+ technology, which significantly enhances the broadband experience by enabling faster download speeds of up to 24 Mbps. This technology ensures that users can enjoy smooth streaming, quick downloads, and efficient web browsing. With its Auto-ADSL feature, the modem automatically detects the type of DSL connection, simplifying the setup process for users.

In addition to its impressive DSL capabilities, the DSL-504G comes equipped with a built-in 4-port Ethernet switch, allowing users to connect multiple devices directly to the modem via Ethernet cables. This feature is particularly useful for users with desktop computers or gaming consoles that require a stable wired connection. Wireless connectivity is facilitated by IEEE 802.11g standards, offering wireless data rates of up to 54 Mbps, and backward compatibility with 802.11b devices. The built-in Wi-Fi capability ensures that users can connect multiple wireless devices such as laptops, smartphones, and tablets without the need for additional hardware.

Security is another important aspect of the D-Link DSL-504G. It supports WPA/WPA2 encryption protocols to protect user data and prevent unauthorized access to the network. The modem router also features a built-in firewall, which helps to safeguard against external threats and provides further peace of mind for users concerned about their online security.

The DSL-504G is designed for easy installation and management, with a user-friendly web interface that simplifies configuration settings. This interface allows users to easily customize their network settings, manage connected devices, and monitor network performance.

Overall, the D-Link DSL-504G is a feature-rich ADSL modem router that caters to the needs of modern users, combining high-speed connectivity, advanced security features, and ease of use in a single, compact device. Whether for home or office use, it delivers a reliable internet experience that users can depend on.
Top Page Image Contents