D-Link DSL-504G manual Static IP Address for WAN Connection, WAN Settings Static IP

Page 37

DSL-504G ADSL Router User’s Guide

Static IP Address for WAN Connection

When the Router is configured to use Static IP Address assignment for the WAN connection, you must manually assign a global IP Address, Subnet Mask and Gateway IP Address used for the WAN connection. Most users will also to configure DNS server IP settings in the DNS Settings configuration menu (see below). Follow the instruction below to configure the Router to use Static IP Address assignment for the WAN connection.

WAN Settings - Static IP

1.Clk to select the Static IP Address radio button listed in the WAN Settings options list. The menu will change to offer a different set of configuration options.

2.Select the Connection Type from the pull-down menu under the Static IP heading. Your ISP should provide this information to you. The available option are 1483 Routed VC-Mux, 1483 Routerd LLC, IpoA VC-Mux, IpoA LLC and IpoA (1577). If have not been provided specific information for the Connection Type setting, leave the default setting.

3.Change the IP Address, Subnet Mask and ISP Gateway Address as instructed by your ISP. Your ISP should have provided these IP settings to you.

4.If you are instructed to use enable Default Route, this setting specifies that the Router be used to define the default route to the Internet for your LAN. Whenever a computer on the LAN attempts to access the Internet, the Router becomes the Internet gateway to the computer.

5.Under the ATM VC Setting heading, do not change the PVC (Pvc0) index for the initial connection.

6.Also under the ATM VC Setting, you see two numbers, the VCI and VPI values. Do not change the VPI or VCI value unless you have been told to do so. These numbers are used to define a unique path for your connection. Most users in Australia will use a VPI of 8, and a VCI of 35. Most users in New Zealand will use a VPI of 0, and a VCI of 100. If you have been given specific settings for this to configure, type in the correct values assigned by your ISP.

7.Change the Virtual Circuit setting to Enabled in the pull-down menu.

8.When you are satisfied that all the WAN settings are configured correctly, click on the Apply button.

9.The new settings must be saved and the Router must be restarted for the settings to go into effect. To Save & Reboot the Router, click on the Tools directory tab and then click the Misc (Miscellaneous) menu button. In the Miscellaneous menu, click he Save & Reboot button. The Router will save the new settings and restart. Upon restarting the Router will automatically establish the WAN connection.

29

Page 36 Page 38
Image 37
Page 36 Page 38
Contents DSL-504G Adsl Router CE Mark Warning Limited Warranty What You Must Do For Warranty Service DSL-504G Adsl Router User’s Guide Contents RIP Page About This User’s Guide Installation RequirementsBefore You Start Record Your Account Information Ethernet Port NIC AdapterInformation you will need about your LAN or computer Router Description and Operation What is ADSL?Router Features Front Panel Display PowerStatus Adsl Link/ActRear Panel Connections Factory Reset Button Power on RouterConnect Adsl Line Network ConnectionsConnect Router to Ethernet Computer to Router ConnectionHub or Switch to Router Connection Wan Configuration Summary Configuring IP Settings on Your ComputerConfigure Windows XP for Dhcp DSL-504G Adsl Router User’s Guide DSL-504G Adsl Router User’s Guide Windows Configure Windows 2000 for DhcpWindows NT 4.0 workstations Windows 95, 98, MEDSL-504G Adsl Router User’s Guide Check for Proxy service in Windows Internet Explorer Access the Web ManagerUsing the Web Manager Using the Setup Wizard DSL-504G Adsl Router User’s Guide Dynamic IP Address Connections PPPoE/PPPoA ConnectionsBridge Connections Static IP Address ConnectionsDSL-504G Adsl Router User’s Guide WAN Settings Menu PPPoE / PPPoA Configure WAN ConnectionPPPoE and PPPoA Connection for WAN Bridged Connection for WAN WAN Settings Menu Bridge ModeDynamic IP Address for WAN Connection WAN Settings Dynamic IP AddressStatic IP Address for WAN Connection WAN Settings Static IPConfigure LAN IP settings LAN IP SettingsConfigure Dhcp server settings for the LAN Dhcp Server Settings for the LANUse the Router for Dhcp Disable the Dhcp ServerUse the ISP’s Dhcp Server Dhcp Server RelayConfigure DNS IP address DNS Server SettingsSave Settings and Restart the Router Save New SettingsDirectory Configuration and Read-only Menus Advanced configuration menusNAT Virtual Server NAT ConfigurationProtocol Type Private IPPrivate Port Public PortFilters Filters Configuration MenuDestination IP Source IPSource Port Destination PortAttacks Port Scans FirewallStatic Routing menu Static RoutingReceive Mode Send ModeIf Name PPP Settings Adsl Modulation SettingsATM VC Multiple Virtual Connections Configure Multiple PVCs12. Configure new VC Tools and Utilities Change System Password15. Time Settings Menu Configure System TimePing Test Save Router Configuration SettingsLoad Saved Configuration Files Save Configuration File to PCRestore Factory Default Settings 18. Firmware Upgrade Firmware UpgradeDevice Information Display Router Status InformationLog Adsl Status22. Traffic Statistics Traffic StatisticsData Transfer Standards & ProtocolsRate Media InterfaceCE Class B, FCC Class B Part Physical and EnvironmentalIn-Line Filters In-line Filter InstallationSplit Line Filter DSL-504G Split Line Filter InstallationPage Offices Print, type or use block letters Registration Card

DSL-504G specifications

The D-Link DSL-504G is a versatile and reliable ADSL modem router designed to meet the needs of both home and small office users seeking high-speed internet connectivity. This device seamlessly combines a DSL modem and a wireless router, providing users with an all-in-one solution for their networking needs. Its robust features and advanced technology make it a popular choice in the marketplace.

One of the standout features of the D-Link DSL-504G is its support for ADSL2/2+ technology, which significantly enhances the broadband experience by enabling faster download speeds of up to 24 Mbps. This technology ensures that users can enjoy smooth streaming, quick downloads, and efficient web browsing. With its Auto-ADSL feature, the modem automatically detects the type of DSL connection, simplifying the setup process for users.

In addition to its impressive DSL capabilities, the DSL-504G comes equipped with a built-in 4-port Ethernet switch, allowing users to connect multiple devices directly to the modem via Ethernet cables. This feature is particularly useful for users with desktop computers or gaming consoles that require a stable wired connection. Wireless connectivity is facilitated by IEEE 802.11g standards, offering wireless data rates of up to 54 Mbps, and backward compatibility with 802.11b devices. The built-in Wi-Fi capability ensures that users can connect multiple wireless devices such as laptops, smartphones, and tablets without the need for additional hardware.

Security is another important aspect of the D-Link DSL-504G. It supports WPA/WPA2 encryption protocols to protect user data and prevent unauthorized access to the network. The modem router also features a built-in firewall, which helps to safeguard against external threats and provides further peace of mind for users concerned about their online security.

The DSL-504G is designed for easy installation and management, with a user-friendly web interface that simplifies configuration settings. This interface allows users to easily customize their network settings, manage connected devices, and monitor network performance.

Overall, the D-Link DSL-504G is a feature-rich ADSL modem router that caters to the needs of modern users, combining high-speed connectivity, advanced security features, and ease of use in a single, compact device. Whether for home or office use, it delivers a reliable internet experience that users can depend on.
Top Page Image Contents