D-Link DSL-500T manual Standards Compatibility and Compliance

DSL-500T ADSL Router User’s Guide

Standards Compatibility and Compliance

The DSL-500T complies with or is compatible with the following standards as recognized by their respective agencies.

•ITU G.992.2 (G.lite “Splitterless ADSL”) compliant

•ITU-T Rec. I.361 compliant

•RFC 791 Internet Protocol compliant

•RFC 792 UDP compliant

•RFC 826 Address Resolution Protocol compliant (ARP) compliant

•RFC 1058 Routing Information Protocol (RIP) compliant

•RFC 1213 MIB II for IP compliant

•RFC 1334 PPP Authentication Protocol compliant

•RFC 1389 Routing Information Protocol 2 (RIP2) compliant

•RFC 1483 IP over AAL5/ Bridged Ethernet over AAL5 compliant

•RFC 1557 Classical IP over ATM (IPoA) compliant

•RFC 1661 Point to Point Protocol (PPP) compliant

•RFC 1877 Automatic IP assignment compliant

•RFC 1994 Challenge Handshake Authentication Protocol compliant

•Supports RFC 2131 and RFC 2132 DHCP functions including: automatic assignment of IP address, use of subnet mask and default gateway and provision of DNS server address for all hosts

•RFC 2364 PPP over ATM compliant (PPPoA) compliant

•RFC 2516 PPP over Ethernet compliant (PPPoE) compliant

•RFC 2684 Bridged/Routed Ethernet over ATM compliant

•IEEE 802.3 compliant

•IEEE 802.3u compliant

•IEEE 802.1d compliant

•IEEE 802.3x compliant

•Embedded web server support

•Supports Dynamic Learning

•Supports Static Routing

•Supports NAPT for up to 4096 connections

•Supports DHCP for up to 253 hot connections

•Supports IGMP

•Supports ATM Forum UNI 3.1/4.0

•Supports ATM VCC (Virtual Channel Circuit) for up to eight sessions

•Supports TELNET and TFTP

•Supports back pressure for half-duplex

3