D-Link DSL-500T manual System Commands, System Function Description Save All, Restart, Restore

DSL-500T ADSL Router User’s Guide

System Commands

The System Commands are used to save settings to non-volatile memory, to reboot the Router and to restore factory default settings to the Router.

	Figure 4-15. Tools – System Commands menu
Click on the appropriate menu button to perform the following system tasks:
System Function	Description
Save All	In order to save the configuration changes you have just made they must be
	saved to the Router’s non-volatile RAM by clicking on the Save All button.
Restart	Click the Restart button to restart the Router. If you have not saved your
	changes, the Router will revert to the previously saved configuration upon
	rebooting the Router.
Restore	The DSL-500T can be reset to the default configuration for all settings using

the Restore option. This will also change the both the LAN and WAN IP address of the device, so these will need to be reconfigured accordingly.

To perform a factory reset, click the Restore button. Since the IP settings will return to their default, you will lose access to the Web Manager. To use the Web Manager interface, the LAN IP address will need to be reconfigured.

51