VIRTUAL SERVER window
1.Click the Add A Rule button to enter your virtual server configuration window.
2.Select a service from the drop down list for
3.Enter your server IP address, protocol and port number.
4.Click Add Rules button to apply settings.
There are many different
Configure these parameters for virtual server on the router:
Virtual Server Category | Description |
|
|
Server IP Address | IP address of your server |
External Port Start/End | Starting and Ending port number for remote users |
Protocol | Protocol used by your server |
Internal Port Start/End | Starting and Ending port number that the router will forward to (In most |
| cases, they are the same as External port numbers) |
|
|
PORT TRIGGERING
Some applications require that specific ports in the Router's firewall be opened for access by the remote parties. Port Trigger dynamically opens up the 'Open Ports' in the firewall when an application on the LAN initiates a TCP/UDP connection to a remote party using the 'Triggering Ports'. The Router allows the remote party from the WAN side to establish new connections back to the application on the LAN side using the 'Open Ports'. A maximum 32 entries can be configured.
1.Click the Add Rule button to enter your port triggering configuration window.
2.Select an application from the drop down list for
3.Enter your trigger/open port number(s), and trigger/open protocol.
4.Click Add A Rule button to apply settings.
51