PYLE Audio PP-7200L manual Quick START-UP, Loading Paper, Connecting Cables

QUICK START-UP

LOADING PAPER

Desk Top Application

1.Slide the hood lock toward the front of the printer to release the hood as in Pix. 1.

2.Raise the released hood wide open manually as in Pix. 2.

3.Drop the thermal paper roll inside the printer in orientation as shown in Pix. 2.

4.Close the hood back leaving

the tail of the paper roll

Pix. 2coming out of the opening between the hood and the top

cover as in Pix. 3. Tear off excessive paper.

When to Replace Paper

Release Button

Pix. 1

Pix. 3

Whenever the printer gives paper out signal or a red line appears on the thermal paper, it is the proper timing for replacing the paper. Do not wait till the print engine is dragging the paper roll at the very end. Remove the leftover and replace a new paper roll as illustrated above to prevent excessive paper dust in the printer and consequently possibility for paper jam.

CONNECTING CABLES

Connection Area Pictures

PP-7000IIPP-7000U

PP-7200LPP-7200U

Serial Connection

All the external connectors are in the recessed area at the rear bottom for PP-7000II. The serial connector is a 9-PIN D sub Female connector at the

Part 6