![](/images/new-backgrounds/1269052/26905215x1.webp)
Use the normal USB Cable (P/N: 21863250800) to connect to a normal USB port or the normal USB portion of the powered USB connector of host system. The power adaptor is required in this normal USB application. Use the powered USB cable to connect a +24V Powered USB port of Posiflex POS system with the powered USB plug, and connect to the USB port in PP- 7000U/7200U with the type B normal USB plug and the
same way as in serial connection, i.e. switch positions both 1, and 2 to OFF leaving the rest unchanged as factory default setting.
Peripheral Connection
The peripheral controller is a 6 pin RJ11 type modular jack. With use of Posiflex cash drawer cable 21863018010
When the printer is used as a kitchen printer, please use this port for kitchen bell connection instead.
Power Connection
The power connector is a
CAUTION: Before doing the insertion or extraction of the power plug, be sure to pull the outer sleeve of the plug backward to release the internal latch. Failure to do this could damage the power plug. Such damage is considered as an artificial destruction and is not covered by the warranty.
Part 8