D-Link DWL-810+ manual How do I assign a Static IP Address in Macintosh OSX?

How do I assign a Static IP Address in Macintosh OSX? (continued)

•Select Built-in Ethernet in the Show pull-down menu

•Select Manually in the Configure pull-down menu.

•Input the Static IP Address, the Subnet Mask and the Router IP Address in the appropriate fields.

•Click Apply Now

3.The DWL-810+ Ethernet-to-Wireless Bridge Power light is not on.

•Check to see if the DWL-810+ Ethernet-to-Wireless Bridge power adapter is connected properly to a known good power outlet.

4.The DWL-810+ Ethernet-to-Wireless Bridge Link light is not on.

•Make sure that the Ethernet cable is connected properly.

•Make sure the AC power adapter is plugged in properly.

21