D-Link DWL-810+ manual Connections, Default Settings, Reset Button Ethernet Port

Page 6
Power Receptor

Connections

Ethernet Port – this RJ-45 Auto MDI/MDIX port provides connection to a network device using a Cat 5 Ethernet cable. (The auto MDI/MDIX port accommodates either Straight- Through or Cross-Over cable and is auto-sensing.)

Reset Button

Ethernet Port

Reset Button – press this button to revert to the factory default settings of the DWL-810+

Power Receptor – connect one end of the 5V DC Power Adapter (included) to the power receptor on the DWL-810+ and connect the other end of the Power Adapter to a power outlet.

Category 5 is the most reliable grade of twisted-pair cable. It is available as either Straight-Throughcable or Cross-Overcable. Always check your installation instructions to make sure that you have selected the correct type of Category 5 cable for your other networking devices. The DWL-810+ will accept either kind of cable and will automatically sense the cable that you are using.

Default Settings

Operating Mode

Infrastructure

 

 

SSID

default

 

 

Channel

6

 

 

Transmission rates

Auto

 

 

Encryption

Disabled

 

 

IP Address

192.168.0.30

 

 

IP Subnet

255.255.255.0

 

 

User Name

admin (all lower case)

 

 

Password

None (leave field blank)

 

 

6

Image 6
Contents Link AirPlus DWL-810+ Contents Package Contents Introduction Features and Benefits LEDsDefault Settings Reset Button Ethernet PortConnections Wireless Basics Wireless Basics Installation Considerations Standards Based TechnologySetup #1 Getting StartedGetting Started DWL-810+Web Configuration Factory Default Settings for the DWL-810+Configuration Menu HomeOperating Mode NetworkAuthentication Admin Click Restore to return to Factory Default SettingsHelp Troubleshooting ConnectionsClick Properties Use the following IP addressSubnet Mask Default Gateway Enter DWL-810+ Ethernet-to-Wireless Bridge Link light is not on How do I assign a Static IP Address in Macintosh OSX?Cannot connect to an access point or wireless router Advanced Setup optionalCannot connect to another wireless client in Ad-Hoc mode Forgot my encryption keyWhy does my wireless connection drop? Cannot connect the DWL-810+ to my networkTechnical Specifications Temperature Power InputTransmitter Output Power Modulation TechnologyContacting Technical Support Warranty and Registration Page Register your D-Link product online at 01/02/03
Related manuals
Manual 12 pages 27.64 Kb

DWL-810+ specifications

The D-Link DWL-810+ is a versatile and innovative wireless device that serves as an Ethernet-to-Wi-Fi bridge. Ideal for users needing to connect non-wireless Ethernet devices to a wireless network, it offers a practical solution for enhancing connectivity in various environments, such as homes or offices.

One of the standout features of the DWL-810+ is its ability to create a secure and reliable network connection for devices such as printers, computers, and network cameras, which might not have built-in wireless capabilities. The device supports a range of wireless standards, including IEEE 802.11b and 802.11g, providing compatibility with a broad spectrum of existing networks.

In terms of performance, the D-Link DWL-810+ operates in the 2.4 GHz frequency range, enabling it to achieve wireless speeds of up to 54 Mbps. This makes it suitable for various online activities, from browsing the web to streaming videos. The device’s advanced wireless security protocols, including WPA and WEP, ensure that all data transmitted over the network remains secure, protecting sensitive information from unauthorized access.

Another notable characteristic is its ability to function in multiple modes such as Infrastructure mode, allowing it to connect to existing wireless networks, and Access Point mode, enabling it to create a new wireless network. The ease of configuration is supported by the user-friendly web-based interface that allows users to set up and manage the device settings efficiently.

The DWL-810+ is designed with durability in mind, making it suitable for long-term usage in various networking environments. Its compact design allows for flexible placement, whether on a desk or mounted to a wall.

For users looking to integrate traditional Ethernet devices into a wireless environment without extensive reconfiguration or new hardware, the D-Link DWL-810+ provides an effective bridge solution. Combining ease of use, solid performance, and robust security features, this device stands out as an essential component for those seeking to enhance their wireless networking capabilities.