D-Link DWL-810+ Advanced Setup optional, Cannot connect to another wireless client in Ad-Hoc mode

Page 22

Advanced Setup (optional)

For advanced setup features, enter http://192.168.0.30 into your Internet browser and gain access to the web configuration of the DWL-810+. The advanced setup features can be used to change the LAN and wireless settings for your DWL-810+ Ethernet-to-Wireless Bridge.

5.I cannot connect to another wireless client in Ad-Hoc mode.

•The DWL-810+ Ethernet-to-Wireless Bridge has a default SSID of default. Make sure that the SSID on the DWL-810+ Ethernet-to- Wireless Bridge is exactly the same as the SSID on the other wireless client.

•The DWL-810+ Ethernet-to-Wireless Bridge has a default channel of 6. Make sure that the channel on the DWL-810+ Ethernet-to-Wireless Bridge is exactly the same as the channel on the other wireless client.

6.I cannot connect to an access point or wireless router.

•Make sure that the SSID on the DWL-810+ is exactly the same as the SSID on the Access Point or wireless router.

•Move the DWL-810+ and Access Point or Wireless router into the same room and then test the wireless connection.

•Disable all security settings. (WEP, MAC Address Control, AES)

•Turn off your Access Point and the device with the DWL-810+. Turn on the Access Point, and then turn on the device with the DWL-810+.

•Make sure that the DWL-810+ is set to Infrastructure mode.

7.I forgot my encryption key.

•Reset the Access Point to its factory default settings and restore the DWL-810+ to its factory default settings. You may do this by pressing the Reset button on the back of the unit. You will lose the current configuration settings.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Link AirPlus DWL-810+ Contents Package Contents Introduction Features and Benefits LEDsReset Button Ethernet Port Default SettingsConnections Wireless Basics Wireless Basics Installation Considerations Standards Based TechnologySetup #1 Getting StartedGetting Started DWL-810+Web Configuration Factory Default Settings for the DWL-810+Configuration Menu HomeOperating Mode NetworkAuthentication Admin Click Restore to return to Factory Default SettingsHelp Troubleshooting ConnectionsClick Properties Use the following IP addressSubnet Mask Default Gateway Enter DWL-810+ Ethernet-to-Wireless Bridge Link light is not on How do I assign a Static IP Address in Macintosh OSX?Cannot connect to an access point or wireless router Advanced Setup optionalCannot connect to another wireless client in Ad-Hoc mode Forgot my encryption keyWhy does my wireless connection drop? Cannot connect the DWL-810+ to my networkTechnical Specifications Temperature Power InputTransmitter Output Power Modulation TechnologyContacting Technical Support Warranty and Registration Page Register your D-Link product online at 01/02/03
Related manuals
Manual 12 pages 27.64 Kb

DWL-810+ specifications

The D-Link DWL-810+ is a versatile and innovative wireless device that serves as an Ethernet-to-Wi-Fi bridge. Ideal for users needing to connect non-wireless Ethernet devices to a wireless network, it offers a practical solution for enhancing connectivity in various environments, such as homes or offices.

One of the standout features of the DWL-810+ is its ability to create a secure and reliable network connection for devices such as printers, computers, and network cameras, which might not have built-in wireless capabilities. The device supports a range of wireless standards, including IEEE 802.11b and 802.11g, providing compatibility with a broad spectrum of existing networks.

In terms of performance, the D-Link DWL-810+ operates in the 2.4 GHz frequency range, enabling it to achieve wireless speeds of up to 54 Mbps. This makes it suitable for various online activities, from browsing the web to streaming videos. The device’s advanced wireless security protocols, including WPA and WEP, ensure that all data transmitted over the network remains secure, protecting sensitive information from unauthorized access.

Another notable characteristic is its ability to function in multiple modes such as Infrastructure mode, allowing it to connect to existing wireless networks, and Access Point mode, enabling it to create a new wireless network. The ease of configuration is supported by the user-friendly web-based interface that allows users to set up and manage the device settings efficiently.

The DWL-810+ is designed with durability in mind, making it suitable for long-term usage in various networking environments. Its compact design allows for flexible placement, whether on a desk or mounted to a wall.

For users looking to integrate traditional Ethernet devices into a wireless environment without extensive reconfiguration or new hardware, the D-Link DWL-810+ provides an effective bridge solution. Combining ease of use, solid performance, and robust security features, this device stands out as an essential component for those seeking to enhance their wireless networking capabilities.
Top Page Image Contents