D-Link DSL-604+ manual Front Panel LED Display, Rear Panel Cable Connections

DSL-604+ ADSL Ethernet Router User’s Guide

Front Panel LED Display

Place the Router in a location that permits an easy view of the LED indicators on the front panel.

The LED indicators on the front panel include the Power, Status, ADSL Link/Activity, and WLAN indicators. Each Ethernet LAN port displays a pair of indicators for monitoring connection speed (10M/100M), link status and activity (Link/Act).

Power	Steady green light indicates the unit is powered on.
Status	Lights steady green during power on self-test. Once the connection status has
	been settled, the light will blink green.
ADSL: Link	Steady green light indicates a valid ADSL connection. This will light after the
	ADSL negotiation process has been settled.
ADSL: Act	Blinking green light indicates activity on the WAN interface.
WLAN	Blinking green light indicates activity on the WLAN.
Ethernet: 10M	Steady green indicates a 100Mbps Fast Ethernet connection. For 10Mbps
100M	Ethernet connection it is dark.
Ethernet: Link	The rear panel of the Router provides access to the AC power adapter cord
Act	connection as well as the port connections.

Rear Panel Cable Connections

Connect the AC power adapter cord and network cables on the rear panel. The power switch and reset button are also located on the back of the device. Connect the antennas to the antenna posts.

Antenna		Factory		Ethernet LAN Ports: Connect		ADSL (WAN Port):
					to Ethernet LAN;	Connect to ADSL line
	post		reset	Four RJ-45 crossed ports		one RJ-11 port
		button

	Power Adapter:		Antenna
Connect power here;		RJ-14 console port used for configuration;
	one 7.5V DC 1.5A		post
	power connection	requires RJ-14 to RS-232 adapter
		4