DSL-604+ ADSL Ethernet Router User’s Guide
DHCP Configuration
Us e the DHCP Configuration on LAN menu to configure the Router to act as a DHCP server for the LAN.
| Figure 4- 7. DHCP Configuration Menu | |
Configure LAN DHCP services by defining the following parameters: | ||
|
| |
Start IP Address | Type in the base address for the IP pool of unassigned IP addresses. | |
|
| |
End IP Address | Type in the last address of the contiguous IP address range to be used by | |
the Router for DHCP function. | ||
| ||
|
| |
Netmask | Type in a subnet mask IP address. | |
|
| |
Default Gateway | Type in the Default Gateway IP Address that will be assigned to and used | |
by the DHCP clients. | ||
| ||
|
| |
Leased Time | This specifies the amount of time (in hours) a client can lease an IP | |
address, from the dynamically allocated IP pool. | ||
| ||
|
| |
Primary DNS | Enter any Internet DNS server IP address available through the WAN | |
connection or use the DNS settings supplied by your service provider. | ||
| ||
|
| |
Secondary DNS | Enter a backup DNS IP address or leave blank. | |
|
| |
Primary WINS | Some LANs may require using WINS servers, enter the IP address of the | |
WINS server or leave blank. | ||
| ||
|
| |
Secondary WINS | Enter a | |
|
| |
Domain Name | Enter a domain name for the network group or leave blank. | |
|
| |
State | Default = enabled. If you wish to disable the DHCP function, select disabled | |
from the | ||
| ||
|
| |
30