To upgrade your router:
1.If the Router Upgrade screen does not display automatically, select Router Upgrade under Maintenance on the main menu. The Router Upgrade screen will then display.
2.Click Browse and locate the unzipped firmware image that you downloaded to your PC (the file will end in .img or .chk).
3.Once you have selected the file, click Upload to send the software to the router. The upload process will take several minutes. When the software upload process is complete, the router will restart.
Do not try to go online, turn off the router, shut down the computer, or do anything else to the router until the router finishes restarting! When the Ready light stops blinking, wait a few seconds more before using the router.
4.After the router has restarted, select Router Status under the Maintenance menu. Check the Firmware Version to verify that your router now has the new software installed.
If you are unable to successfully upgrade using this method, refer to the online Reference Manual for other ways to upgrade the router. The Reference Manual is available through the Documentation link on the router main menu (or through a link on the Resource CD).
If you selected the No radio box during installation, and want to check for new firmware later, follow the procedure below. It is advisable to determine the firmware version currently running on your router before you check for updates on the NETGEAR website. Then go to the NETGEAR website and select the model number for this router. If a later version of the firmware is available, download the firmware to your computer and upgrade your router.
To manually check for new router firmware:
1.Open a browser window and type http://www.routerlogin.net in the address field of your browser. Press Enter.
2.When prompted, enter the default Password (password for the router Password), in lowercase letters. If you changed the Password from the default, then enter your new Password.
3.Select Router Status under the Maintenance menu on your router interface. When the Router Status screen displays, note the version number of your router firmware.
4.Go to http://www.NETGEAR.com/support and select Downloads from the menu bar.
5.From the Product Selection
12 | Installing Your Router Using the Smart Wizard |