NETGEAR WNR834Bv2 Checking the Internet Service Connection, Obtaining an Internet IP Address

Page 34

Make sure your computer’s IP address is on the same subnet as the router. If your are using the recommended addressing scheme, your computer’s address should be in the range of 192.168.1.2 to 192.168.1.254. Refer to your computer’s documentation or see “Preparing a Computer for Network Access” in “Related Documents” on page 39 for help with configuring your computer.

If your computer cannot reach a DHCP server, some operating systems will assign an IP address in the range 169.254.x.x. If your IP address is in this range, verify that you have a good connection from the computer to the router, then restart (reboot) your computer.

If your router’s IP address has been changed and you don’t know the current IP address, reset the router’s configuration to the factory defaults. This procedure will reset the router’s IP address to 192.168.1.1 (see “Restoring the Default User Name and Password” on page 36).

Make sure your browser has Java, JavaScript, or ActiveX enabled. If you are using Internet Explorer, click Refresh to be sure the Java applet is loaded. Try closing the browser and reopening it again.

Checking the Internet Service Connection

If your router is unable to access the Internet, check the Internet connection, and then check the wireless router.

Internet Connection. The cable or DSL modem status lights indicate if the modem connection is successful or not. Check your modem documentation or call your Internet service provider for help with verifying that the modem has a successful connection.

Wireless Router Internet Light is Green or Blinking Green. If your Internet light is green or blinking green, then you have a good Internet connection and your wiring is correct.

Wireless Router Internet Light Off. If the Internet light is off, verify that the Ethernet cable is securely connected between the cable or DSL modem, and that both the modem and wireless router are turned on.

Obtaining an Internet IP Address

If your wireless router is unable to access the Internet, and your Internet light is amber, check the wireless router to see if it is able to get an Internet IP address from your service provider. Unless

30

Troubleshooting

Image 34
Contents Wireless Router Setup Manual Trademarks Contents Related Documents Registration and Certifications Getting to Know Your Wireless Router Unpacking Your New RouterGetting to Know Your Wireless Router Hardware Features Front PanelPositioning Your Wireless Router Router LabelInstalling Your Wireless Router Updating Your Router Firmware Getting to Know Your Wireless Router Getting to Know Your Wireless Router Installing Your Router Using the Smart Wizard Using the Smart WizardLogin window similar to the one shown below will display Firmware Upgrade Assistant screen will display To upgrade your router Installing Your Router Using the Smart Wizard Installing Your Router Using the Smart Wizard Connecting Your Wireless Router To connect the wireless router, the computer, and the modem Page Verifying Your Connection Setting Up Your Router for Internet Access Read Troubleshooting on Checking for New Firmware To upgrade your router Configuring Your Wireless Settings and Security Options To set up wireless connectivity and enable wireless security Setting Up Your Wireless Computers Page Troubleshooting Basic Setup ChecklistChecking Basic Router Functions Troubleshooting Login Problems Checking the Internet Service Connection Obtaining an Internet IP AddressTroubleshooting PPPoE Using the Ping Utility to Troubleshoot Troubleshooting Internet BrowsingTesting the Path from a Computer to the Internet Troubleshooting Default Configuration Default Configuration SettingsRestoring the Default User Name and Password FirewallDefault Configuration Default Configuration Related Documents Related Documents Registration and Certifications