Default Configuration
Default Configuration Settings
You can use the Restore Factory Settings button located on the back of your device to reset all configuration settings to their factory defaults. This is called a hard reset.
•To perform a hard reset, push and hold the Restore button for approximately 5 seconds (until the POWER LED blinks rapidly). Your device will return to the factory configuration settings shown in Table 1 below.
•Pressing the Restore button for a shorter period of time will simply cause your device to reboot.
Table 1. | Home Router Default Configuration Settings | ||
|
|
|
|
Feature |
| Default Setting | |
|
|
| |
Smart Wizard | Disabled | ||
|
| ||
Router Login |
| ||
|
|
| |
| Router Login URL | http://www. routerlogin.net; | |
|
|
| http://www.routerlogin.com; or http://192.168.1.1 |
|
|
| |
| Login Name (case sensitive) | admin | |
|
|
| |
| Login Password (case sensitive) | password | |
|
|
| |
Internet Connection |
| ||
|
|
| |
| WAN MAC Address | Default hardware address (on label) | |
|
|
| |
| MTU Size | 1500 | |
|
|
| |
Local Network |
| ||
|
|
| |
| Router Lan IP address (the Gateway IP | 192.168.1.1 | |
| address) |
| |
|
|
| |
| IP Subnet Mask | 255.255.255.0 | |
|
|
| |
| DHCP Server | Enabled | |
|
|
| |
| Time Zone | GMT | |
|
|
|
|
Default Configuration | 35 |