NETGEAR manual Ethernet Ports, Label on the Rear Panel of the XE104

Page 14

XE104 User Guide

Ethernet Ports

The XE104 has four Ethernet ports: two on each side of the unit. Each port includes two embedded links, as shown in the following diagram.:

1.2.

Figure 2-2

Function

Activity

Description

 

 

 

1. Speed

On Green Solid

Speed is 100 Mbps.

 

Off

Speed is 10 Mbps or there is no link.

2. Link/ACT

On Green Solid

Linked with no data activity.

 

Blink

Linked with data activity.

 

Off

Not linked

 

 

 

The Label on the Rear Panel of the XE104

The label on the rear panel of the XE104 contains the items listed below.

MAC address

Model number

Serial number

Unique device Passcode (PWD)

2-4

Introduction

v1.0, September 2005

Image 14
Contents XE104 User Guide Trademarks Product and Publication Details V1.0, September Contents Chapter Troubleshooting Chapter About This Manual Audience, Scope, Conventions, and FormatsHow to Use This Manual How to Print this ManualPrinting a Chapter XE104 User Guide Key Features Chapter IntroductionPackage Contents Connectors, Ports, and Label InformationXE104 Wall-Plugged Ethernet Switch Status Light DescriptionsEthernet Ports Label on the Rear Panel of the XE104Installing the XE104 Wall-Plugged Ethernet Switch How the PowerLine Switch Fits in Your NetworkPrepare to Install Your PowerLine Switch Connect an XE104 to the RouterOFF Connect other Ethernet PowerLine Switches XE104 User Guide XE104 User Guide XE104 User Guide XE104 User Guide Set Your Network Password XE104 User Guide Add a Device to an Existing PowerLine Network Adding a New Device from a Locally Connected Computer Adding a New Device from a Remotely Connected ComputerNetgear Product Registration, Support, and Documentation Basic FunctioningEthernet Light is Off Power Light Not OnHomePlug Light Not On