NETGEAR WNDR3700 user manual Troubleshooting 105

Page 105

N600 Wireless Dual Band Gigabit Router WNDR3700v4

fixed IP address, your router requests an IP address from the ISP. You can determine whether the request was successful using the Router Status screen.

To check the WAN IP address:

1.Start your browser, and select an external site such as www.netgear.com.

2.Access the router interface at www.routerlogin.net.

3.Select Administration > Router Status.

4.Check that an IP address is shown for the Internet port. If 0.0.0.0 is shown, your router has not obtained an IP address from your ISP.

If your router cannot obtain an IP address from the ISP, you might need to force your cable or DSL modem to recognize your new router by restarting your network, as described in Sequence to Restart Your Network on page 102.

If your router is still unable to obtain an IP address from the ISP, the problem might be one of the following:

Your Internet service provider (ISP) might require a login program.

Ask your ISP whether it requires PPP over Ethernet (PPPoE) or some other type of login.

If your ISP requires a login, the login name and password might be set incorrectly.

Your ISP might check for your computer’s host name.

Assign the computer host name of your ISP account as the account name in the Internet Setup screen.

Your ISP allows only one Ethernet MAC address to connect to Internet and might check for your computer’s MAC address. In this case, do one of the following:

-Inform your ISP that you have bought a new network device, and ask them to use the router’s MAC address.

-Configure your router to clone your computer’s MAC address.

If your router can obtain an IP address, but your computer is unable to load any web pages from the Internet:

Your computer might not recognize any DNS server addresses.

A DNS server is a host on the Internet that translates Internet names (such as www addresses) to numeric IP addresses. Typically, your ISP provides the addresses of one or two DNS servers for your use. If you entered a DNS address during the router’s configuration, reboot your computer, and verify the DNS address. You can configure your computer manually with DNS addresses, as explained in your operating system documentation.

Your computer might not have the router configured as its TCP/IP gateway.

If your computer obtains its information from the router by DHCP, reboot the computer, and verify the gateway address.

You might be running login software that is no longer needed.

If your ISP provided a program to log you in to the Internet (such as WinPoET), you no longer need to run that software after installing your router. You might need to go to

Troubleshooting

105

Image 105
Contents N600 Wireless Dual Band Gigabit Router WNDR3700v4 Support ComplianceTrademarks Contents Netgear genie Advanced Home Advanced Settings Appendix a Supplemental Information Getting to know your router Hardware SetupHardware Features Unpack Your RouterFront Panel Icon Description Label Back PanelPosition Your Router Attach the StandCable Your Router Verify the Cabling Hardware Setup Getting Started with Netgear Genie Connecting the routerTypes of Logins and Access Router Setup PreparationWireless Devices and Security Settings Use Standard TCP/IP Properties for DhcpUpgrade the Firmware Use Netgear genie after InstallationBasic Home screen with dashboard, language, and online help Dashboard Basic Home ScreenWi-Fi Protected Setup WPS Method Join Your Wireless Network To use WPS to join the wireless network Manual MethodNetgear genie App and Mobile genie App Your Internet connection and network Netgear genie Basic SettingsInternet Setup  To view or change the basic Internet setupBasic Home Screen Internet Setup Screen Fields Does Your ISP Require a Login? Answer either yes or noInternet IP Address  To go to the Attached Devices screen Attached DevicesParental Controls  To set up Live Parental ControlsNetgear genie Basic Settings Click the Take me to the status screen button ReadySHARE Storage To view or change basic wireless settings Basic Wireless SettingsWireless Settings Screen Fields Wireless Network 2.4 GHz b/g/n and 5 GHzRegion Selection Change WPA Security Option and Password Security Options Settings To change the WPA settings Guest Networks  To set up a guest network Select Basic Guest NetworkWPA Encryption Guest Network Wireless Security OptionsNetgear genie Advanced Home Specify custom settingsSetup Wizard  To use the Setup WizardNetgear genie Advanced Home Screen WPS Wizard  To use the WPS Wizard Select Advanced WPS WizardSelect either Push Button or PIN Number Setup Menu WAN Setup  To set up a default DMZ server Default DMZ ServerCommon MTU sizes Change the MTU SizeLAN Setup  To change the MTU size Select Advanced Setup WAN Setup To change the LAN settings LAN Setup Screen Settings LAN TCP/IP SetupUse Router as a Dhcp Server Use the Router as a Dhcp Server Address ReservationAddress Reservation Enable WMM QoS for Wireless Multimedia Applications Quality of Service QoS Setup To configure QoS  To reserve an IP addressSet Up QoS for Internet Access QoS for Applications and Online Gaming To create a QoS policy for applications and online games Select the Turn Internet Access QoS On check box QoS for a Router LAN PortClick the Add Priority Rule button QoS for a MAC Address  To edit or delete a QoS policy Select Advanced QoS SetupEdit or Delete an Existing QoS Policy Click Add Priority RuleStorage Accessing and configuring a USB storage To access the USB device from Windows ReadySHARE AccessFile-Sharing Scenarios Share PhotosStore Files in a Central Location for Printing Share Large Files over the Internet To share files with your friends and family Storage Basic Settings  To go to Storage Basic Settings Select Basic ReadySHARE To access your USB device Select Basic ReadySHARE, and click Edit Add or Edit a Network Folder To go to USB Storage Advanced Settings Storage Advanced SettingsSafely Remove a USB Drive Media ServerAvailable Network Folders Select the Allow only approved devices check box Specify Approved USB Devices To connect to the router’s USB drive using a web browser Access the Router USB Drive Remotely Using FTPConnect to the USB Drive from a Remote Computer Ftp//10.1.65.4Security Keep unwanted content out of yourSelect Advanced Security Block Sites Keyword Blocking of Http Traffic To delete a keyword or domain  To specify a trusted computer To block services Select Advanced Security Block Services Block Services Port FilteringSecurity  To schedule blocking Schedule BlockingSecurity Event Email Notifications Manage your network Administration To check for new firmware and update your router Router Information View Router StatusHardware Version. The router model LAN PortShow Statistics Button Internet PortConnection Status Button Wireless Settings 2.4 GHz and 5 GHzAdministration View Logs of Web Access or Attempted Web Access Back Up Settings Manage the Configuration FileRestore Configuration Settings ErasePassword Recovery Set PasswordCustomize your network Advanced SettingsAdvanced Wireless Settings Restrict Wireless Access by MAC Address Wireless AP  To restrict access based on MAC addressesSelect the Turn Access Control On check box Select the Enable Access Point Mode check box Wireless Repeating Function WDSWireless repeating scenario Following settings are available  To view or change the Wireless Repeating Function settings To set up the base station Set Up the Base Station To configure the router as a repeater unit Set Up a Repeater UnitPort Forwarding and Port Triggering Remote Computer Access BasicsDestination port number Port Triggering to Open Incoming PortsPort Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering  To set up port forwarding Set Up Port Forwarding to Local ServersAdd a Custom Service Set Up Port Triggering Edit or Delete a Port Forwarding EntryApplication Example Making a Local Web Server Public Advanced Settings Dynamic DNS  To set up Dynamic DNS Select the Use a Dynamic DNS Service check boxStatic Routes  To set up a static route Remote Management USB Settings Universal Plug and Play To turn on Universal Plug and Play IPv6  To set up an IPv6 Internet connection typeIPv6 LAN Setup Auto Detect FieldsIPv6 Filtering Auto Config Pass Through 6to4 TunnelIPv6 Fixed WAN Setup IPb6 Fixed LAN SetupFixed Dhcp PPPoE Traffic Meter Troubleshooting Quick Tips Troubleshoot with the LEDs Power LED Is Off or BlinkingLEDs Never Turn Off Internet LED Is OffCannot Access the Internet Wireless 2.4 GHz and 5 GHz LEDs Are OffCannot Log In to the Router Troubleshooting 105 Wireless Connectivity Changes Not SavedIncorrect Date or Time Wireless Signal Strength Supplemental Information Factory default settings Factory SettingsWPA2-PSK AES Technical SpecificationsSupplemental Information 111